[SI-LIST] Re: Finding the impedance of a PCB trace
- From: "Graham Davies" <GrahamDavies@xxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 02 May 2005 22:44:09 -0000
--- In si-list@xxxxxxxxxxxxxxx, christopher.heard@xxxx wrote:
> ... surface microstrip traces
> get "plated up" to a thicker
> value ...
For what it's worth, I believe my PCB is plated up from 0.5 oz to 1.0
oz with 1.0 oz in the inner layers, so this is why I'm using 1 oz.
Graham.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
