"I’m not suggesting that people remove the blast deflector on the ROC pads.
That’s up to Kurt and the Board."
Actually, it is not up to Kurt or the board. Before launching again I suggest
reviewing the applicable safety codes. Blast deflectors are required.
" First, check tightness on all the fasteners on the pad, but don’t strip them."
Please avoid damaging the pads. Once they are set up, there should be no
tampering with fasteners that are not used to load a rocket.
David P SmithROC Board of DirectorsNAR 78668, TRA 15803, L2Amateur Extra,
W6DPShttp://www.qsl.net/w6dps ;
