[roc-chat] Re: Please, share your wisdom and experience!

  • From: Mike Riss <rockt_dude@xxxxxxxxxxxxx>
  • To: "roc-chat@xxxxxxxxxxxxx" <roc-chat@xxxxxxxxxxxxx>
  • Date: Fri, 26 Jun 2015 23:42:00 +0000 (UTC)

Mortgage before Motors.
Mike


On Friday, June 26, 2015 4:16 PM, Kenneth Harkema <kenrico2000@xxxxxxxxx>
wrote:


My favorite: if you 'twist and tape' don't tape to the lower airframe . . . 
Kenny
On Fri, Jun 26, 2015 at 4:14 PM, Kurt Gugisberg <kurtgug@xxxxxxxxx> wrote:

This could also lead to a section on what you have learned from dumb
mistakes..for example...Always make sure your quick links are closed..courtesy
of Wedge Oldham.  Another one...that screw driver in your hand was for arming
your electronics before the flight, not after.  

Kurt

On Fri, Jun 26, 2015 at 3:40 PM, David Smith <davew6dps@xxxxxxxxx> wrote:

On this chat, and in the club in general, we have some pretty experienced
folks. Some who have developed special skills and techniques over the course of
years of rocketry.We are always looking for those willing to put together "how
to" articles related to rocketry.If you have learn some useful tips, or learned
some things to avoid, ease write down your thoughts and send them to me. We
have a page on our website to share experience and
advice.Http://rocstock.org/advancedIf you have some skills or tips from other
hobbies or activities that you find are useful to rocketry, we would like to
hear from you.Photo are great, and videos even better.You don't have to be an
old hand, either.
A quick write up on building your first high powered rocket could help others
about to jump off the deep end.If you have any questions, or suggestions,
pkease email me.David Smith
NAR 78668, L2
Amateur Extra, W6DPS
ROC Board Member





--
Kenneth Harkema
Mobile: 619-248-4716

Other related posts:

  1. Home
  2. roc-chat
  3. Archive
  4. 06-2015