NUTZ!
-----Original Message-----
From: Ken Young <kanawha72@xxxxxxxxxxx>
To: rc3r <rc3r@xxxxxxxxxxxxx>
Sent: Sat, Dec 22, 2018 9:58 pm
Subject: [rc3r] GBGH Sunday
Sat afternoon we had a number of DCS issues. Variable 2 channel (inside loop)
on the TIU started acting strange. Engines would stutter and stop, would not
restart and then suddenly start responding, even TMCC and conventional engines
wouldn't work on the inside loop. The cheap meter I've left there was showing
58 volts on the track! I don't think it was actually that high, whatever was
going on was "fooling" the meter. Changed the inside loop over to Variable 1
and everything started working again. Then the channel shut down altogether.
We have voltage going in and nothing coming out. Right now I have no idea
what's wrong. I set up the inside loop for conventional operation. It appears
we are down to one operating channel on this TIU.
For those working Sunday there will be no DCS on the inside loop. You can run
conventional or TMCC only. DCS should work OK on the outside loop.
Ken