[pure-silver] Re: matting square prints
- From: Malcolm & Sylvia Brickwood <m_s.brickwood@xxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 21 Feb 2005 18:10:00 -0800
I use a Falcon Print Positioner, available in the US and Europe:
http://www.bhphotovideo.com/bnh/controller/home?=20
ci=3D1&sb=3Dps&pn=3D1&sq=3Ddesc&InitialSearch=3Dyes&O=3DSearchBar&A=3Dsear=
ch&Q=3D*&shs=3Df=20
alcon+print+positioner&image.x=3D5&image.y=3D5
There's a wee word wrap problem here so you'll need to stitch the two =20=
lines together
or at:
http://www.silverprint.co.uk/fin2.html
Just scroll down half way down the page
Interesting price comparison.
Malcolm
On Feb 21, 2005, at 3:05 PM, DarkroomMagic wrote:
> This is a matter of taste.
> However, IMHO, a square print looks best mounted and matted on a =20
> vertical
> board. As the print placement, the =91optical center=92 should be =20
> considered and
> the print adjusted from there. It is easier to explain the optical =20
> center
> location with the aid of some illustrations, but FWIW here is an =20
> attempt to
> do so in some unpolished words, which are part of an article I=92m =20
> currently
> working on:
>
Snip, Snip ...
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
