pdesmidt tds.net wrote: > Steve Grime's shop does that sort of thing all the time, i.e. making > custom retaining rings. It's not exactly inexpensive, but they do a > great job. In a pinch once I used some 5-ply 1/8" thick model airplane > plywood. I cut a hole using a fly clutter (an adjustable circle cutter) > on a drill press. I made the hole just big enough so the thread would > cut their own track into the plywood. It worked fine, but it's clearly > not as elegant or secure as the real thing. > www.skgrimes.com/index.htm -- .~. Jean-David Beyer Registered Linux User 85642. /V\ PGP-Key: 9A2FC99A Registered Machine 241939. /( )\ Shrewsbury, New Jersey http://counter.li.org ^^-^^ 08:20:01 up 29 days, 11:38, 3 users, load average: 4.46, 4.64, 4.70 ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.