[pure-silver] Re: Kodak Enlarging Lens
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Wed, 28 Sep 2005 18:41:57 -0700
----- Original Message -----
From: "Eric Maquiling" <emaquiling@xxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Wednesday, September 28, 2005 11:28 AM
Subject: [pure-silver] Re: Kodak Enlarging Lens
My lens measures about 1-9/16 inches or nearly 40mm. It
does not fit the 39mm cutout in an Omega lensboard. I was
That's what I thought.
So guys, I like my 100mm Ektar but if you do buy one, get
one with a
retaining ring cause you might have a hard time finding a
retaining
ring that fits.
--
Eric
I just found the booklet with enlarging lens data in it.
It gives the diameter for the mounting hole as 1-37/64
inches. Talk about your odd values.
FWIW it gives the following: Enlarging lens Retaining ring
Part No. HE24054
Enlarging Lens Flange, No.4
I'm sure your local Kodak distributor has boxes full of
these right at hand.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts: