[pure-silver] Re: Kodak Enlarging Lens

  • From: "Dave Valvo" <dvalvo@xxxxxxxxxxxxxxxx>
  • To: <pure-silver@xxxxxxxxxxxxx>
  • Date: Wed, 28 Sep 2005 22:20:04 -0400

There is a guy here in Rochester that has tons of old photo gear for sale.
Consignment stuff also.
You may want to call Photo Source  585-454-1170.
Located across the river but in the shadow of Kodak Tower.

Dave

----- Original Message ----- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Wednesday, September 28, 2005 9:41 PM
Subject: [pure-silver] Re: Kodak Enlarging Lens




----- Original Message ----- From: "Eric Maquiling" <emaquiling@xxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Wednesday, September 28, 2005 11:28 AM
Subject: [pure-silver] Re: Kodak Enlarging Lens



  My lens measures about 1-9/16 inches or nearly 40mm. It
does not fit the 39mm cutout in an Omega lensboard. I was

That's what I thought.

So guys, I like my 100mm Ektar but if you do buy one, get one with a
retaining ring cause you might have a hard time finding a retaining
ring that fits.

--
Eric

I just found the booklet with enlarging lens data in it. It gives the diameter for the mounting hole as 1-37/64 inches. Talk about your odd values.
FWIW it gives the following: Enlarging lens Retaining ring Part No. HE24054
Enlarging Lens Flange, No.4


I'm sure your local Kodak distributor has boxes full of these right at hand.

---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.




=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: