On January 10, 2005 02:50 pm, Georges Giralt wrote: > So you've a carrier which is not the "one" and another one which won't > fit. Maybe you can build your own provided you buy two sheet of optical > glass ? the size for the OTONEG are easy to find, as there is a recess > into which the glass goes. You can file the upper part of the OTONEG in > order to be able to fit the L1000 (you paid a little price for it, and > you may be able to find another one if needed ...) > Be carefull to file only the upper part, otherwise you will impair the > alignment if you do not file perfectly... You may also remove the two > light traps which are spring loaded to press on the lower part of the > color head (you can replace it with some black foam or velvet) It's not > rocket science.... If you work on the OTONEG, you may be able to find > glasses or glassless carriers as they show from time to time in Ebay... > Hope this helps ! > I took the head apart to really check everything out. It's not going to fit unless I remove the runners. If I do that it might cause other problems. I think I'm back to the idea of buying two sheets of glass and taping them together. On the positive side the head now moves better. Thanks Nick ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.