On May 13, 2011, at 14:59, BOB KISS wrote: > DEAR DENNIS, > Grif may have hit on something here. I just got in the fluid > scanning supplies for my Epson V750 scanner. If your client is using a > fluid system to scan the negs there is a very high probability that > imperfections in the base will be nearly totally, if not totally, obscured > because the fluid is supposed to be nearly the same refractive index as film > base and one normally scans (at least with the V750) emul side up/base side > down (on the glass). > Where do you live/work? Is there no one near you who could do a > test scan for you? > CHEERS! > BOB I think you guys are probably right about the fluid because looking through a loupe at the image on a light table you see nothing wrong. I also think I could l print the negs with a cold light head and see nothing. However I need to know WTF it is and why. Thanks Dennis============================================================================================================To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.