Re: [PCWorks] Network Connection in my Syatem Tray

  • From: "Linda F. Johnson" <linda@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
  • To: <pcworks@xxxxxxxxxxxxx>
  • Date: Mon, 4 Aug 2008 13:42:15 -0400

Hi Harold ... when you right click on the icon, select Open Network
Connection ... then you will see your connection in that box, right click on
that and choose Properties and in there is where you will see those
checkboxes.


Linda

*********************************
Linda F. Johnson
Linda's Computer Stop
http://personal-computer-tutor.com

-----Original Message-----
From: pcworks-bounce@xxxxxxxxxxxxx [mailto:pcworks-bounce@xxxxxxxxxxxxx] On
Behalf Of Harold B.
Sent: Monday, August 04, 2008 1:27 PM
To: pcworks@xxxxxxxxxxxxx
Subject: Re: [PCWorks] Network Connection in my Syatem Tray

Of course Hugh is right, but my problems are more in my head than in my 
computer; if it doesn't have to be there, I have to get it out. I'm using 
dial-up right now but in a few weeks I'll be graduating almost to the 
internet major leagues, and will be using DSL (that will be "broadband" if 
that makes a difference in how to remove this icon). As an aside, Verizon 
said I'll no longer need my current RCN dial-up connection (saving $20), 
they'll connect me to DSL for the same $20, and I'll be saving approximately

$30 by no longer needing the second phone line that I had installed before 
ever knowing about DSL (total savings of $30 a month with a faster 
connection). I'm suggesting to the co-op board that my entire two buildings,

around 580 units, that we have to "get with it" and be cable internet 
connected; here's hoping.

Note to Peter:When right clicking the icon, there is no Properties line, 
again, maybe you are talking about broadband and I'm using dial-up. The 
"network cable is unplugged" line (only seen with the mouse hovering over 
the icon) seems to be causing no problem; i.e. I have no trouble at all with

accessing and remaining on the internet. Why it is there, I don't know.

Note to Hugh and Clint: When right-clicking it, it offers two options: 
"Change Windows Firewall settings" and "Open Network Connections". I see no 
"Show Icon when connected" , and "Show limited connectivity". When opening 
it (left clicking), it opens to a Network Connections folder which among 
other connections, lists my ISP. Now when right-clicking my ISP > 
Properties, there I get a check box, "Show icon in notification area when 
connected" BUT, that for the actual internet connection icon to show and 
only when connected. This Network Connection icon is different. --- Harold


=========================
The list's FAQ's can be seen by sending an email to 
PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line.

To unsubscribe, subscribe, set Digest or Vacation to on or off, go to 
//www.freelists.org/list/pcworks .  You can also send an email to 
PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line.  Your 
member list settings can be found at 
//www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks .  Once logged in, you have 
access to numerous other email options.  

The list archives are located at //www.freelists.org/archives/pcworks/ .  
All email posted to the list will be placed there in the event anyone needs to 
look for previous posts.
-zxdjhu-

Other related posts: