Re: [PCWorks] Network Connection in my Syatem Tray

  • From: Hugh Vandervoort <hughv2@xxxxxxxxxxx>
  • To: pcworks@xxxxxxxxxxxxx
  • Date: Tue, 05 Aug 2008 00:25:16 -0400

Dial-up? I didn't realize there was any American still using dial-up.
This means you're not using your ethernet connection, hence the 
"Unplugged" notice.(Because it is, indeed, unplugged.)
When you get your DSL, this connection will be utilized, and the pop-up 
should go away.



Harold B. wrote:
> Of course Hugh is right, but my problems are more in my head than in my 
> computer; if it doesn't have to be there, I have to get it out. I'm using 
> dial-up right now but in a few weeks I'll be graduating almost to the 
> internet major leagues, and will be using DSL (that will be "broadband" if 
> that makes a difference in how to remove this icon). As an aside, Verizon 
> said I'll no longer need my current RCN dial-up connection (saving $20), 
> they'll connect me to DSL for the same $20, and I'll be saving approximately 
> $30 by no longer needing the second phone line that I had installed before 
> ever knowing about DSL (total savings of $30 a month with a faster 
> connection). I'm suggesting to the co-op board that my entire two buildings, 
> around 580 units, that we have to "get with it" and be cable internet 
> connected; here's hoping.
> 
> Note to Peter:When right clicking the icon, there is no Properties line, 
> again, maybe you are talking about broadband and I'm using dial-up. The 
> "network cable is unplugged" line (only seen with the mouse hovering over 
> the icon) seems to be causing no problem; i.e. I have no trouble at all with 
> accessing and remaining on the internet. Why it is there, I don't know.
> 
> Note to Hugh and Clint: When right-clicking it, it offers two options: 
> "Change Windows Firewall settings" and "Open Network Connections". I see no 
> "Show Icon when connected" , and "Show limited connectivity". When opening 
> it (left clicking), it opens to a Network Connections folder which among 
> other connections, lists my ISP. Now when right-clicking my ISP > 
> Properties, there I get a check box, "Show icon in notification area when 
> connected" BUT, that for the actual internet connection icon to show and 
> only when connected. This Network Connection icon is different. --- Harold
> 
>> From: Peter Kaulback
>> Harold, as you correctly presume you do not need to have showing the icon 
>> for your network connection. So if you choose status when right clicking 
>> the icon, then Properties you can uncheck the box "Show icon in 
>> notification area when connected".As for the "A network cable is 
>> unplugged" message see this MS page
>> http://support.microsoft.com/kb/910389 --- Peter Kaulback
>>
>> From: Hugh Vandervoort
>> It's just there as a System Status sort of thing. It doesn't use enough 
>> resources to worry about, but you can remove it by right-clicking the 
>> connection icon and looking for "Show Icon when connected" , and "Show 
>> limited connectivity" and uncheck it.
>>
>> From: "Clint Hamilton-PCWorks Admin"
>> I would think you would want the Network icon in the tray when the 
>> connection is lost. You can go into the network settings and change this. 
>> Right click the icon on the Desktop, > Properties, then right click the 
>> connection and again go to Properties, and you'll see the two boxes at the 
>> bottom. The logical way to have them is to only check the box to notify 
>> you when the connection is lost. Then the icon won't be there, unless the 
>> connection is lost. (It doesn't just show if you unplug a cable, it will 
>> also show if there is a problem and you lose the connection). I don't know 
>> if you're on dialup or broadband, so what I'm talking about is for BB, I 
>> don't know if it's the same way for dialup. -Clint
> 
>>> ----- Original Message -----  From: "Harold B."
>>> Hello again ... I try to keep as few icons in my system tray as possible. 
>>> What I know I need is my internet connection icon (when I am connected), 
>>> my AVG and ZoneAlarm icons (which I configured to open when Windows 
>>> opens), and a "safely remove hardware" icon that lists my USB connections 
>>> (specifically my flash drive plugged into one of my ports and it seems 
>>> that as long as the flash drive stays connected, that icon remains in the 
>>> system tray).
>>>
>>> What seems superfluous is an icon reading (when pointer is over it) 
>>> "Local area connection" and "A network cable is unplugged". When 
>>> right-clicking it, it offers two options: "Change Windows Firewall 
>>> settings" and "Open Network Connections". When opening it 
>>> (left-clicking), it opens to a Network Connections folder which among 
>>> other connections, lists my ISP. I see no need for it in my system tray, 
>>> unless someone can explain why it is important for it to be there, so 
>>> would anyone know how it can be removed? --- Harold
=========================
The list's FAQ's can be seen by sending an email to 
PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line.

To unsubscribe, subscribe, set Digest or Vacation to on or off, go to 
//www.freelists.org/list/pcworks .  You can also send an email to 
PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line.  Your 
member list settings can be found at 
//www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks .  Once logged in, you have 
access to numerous other email options.  

The list archives are located at //www.freelists.org/archives/pcworks/ .  
All email posted to the list will be placed there in the event anyone needs to 
look for previous posts.
-zxdjhu-

Other related posts: