Hi Joe, My users can send email , they are unable to get email from the internet. --- Joe Shonk <JShonk@xxxxxxxxxxxxxx> wrote: > > If your users are going to use SMTP, then you need > to allow relay for = > those users. Any particular reasone why your users > do not use MAPI? = > The MAPI client(Outlook) is much more feature rich. > If it's just = > POP3/IMAP/SMTP, there are much more cost effective > ways to implement = > than Exchange 2k. > > Joe > > -----Original Message----- > From: kimiagar kimiagar > [mailto:kimiagar1974@xxxxxxxxxxx] > Sent: Wednesday, March 05, 2003 12:50 AM > To: msexchange@xxxxxxxxxxxxx > Subject: [msexchange] Re: Upgrade Exchange 5.5 to > Exchange 2K=20 > > > > Hi Joe, > My users use POP3/IMAP/SMTP and I'v looked at my > recipient policy . It seems that everything is ok. > But after installation via both ways (In_place & > move > mailbox),there will be 2 policies in recipient > policy. > One of them is default policy and the other one is a > policy whose name is similar to my exchange 5.5 > display name and this policy has high priority.=20 > but in both of these policies the smtp address is > correct. for example: mycompany.com=20 > Thanks for your attention. > > --- Joe Shonk <JShonk@xxxxxxxxxxxxxx> wrote: > >=20 > > There is difference between an in place upgrade > and > > move mailbox method. =3D > > For one, you can rebuild the original. In place > > upgrades are =3D > > nortorious for having issues. (need I mention the > > reason the upgrade CD =3D > > has a Rev A???) > >=20 > > As far as SMTP, have you looked at your recipient > > policy to make sure =3D > > the correct domain addresses are being generated > for > > your users? > >=20 > > Are your users use the MAPI client? or > > POP3/IMAP/SMTP? > >=20 > > Joe > >=20 > > -----Original Message----- > > From: kimiagar kimiagar > > [mailto:kimiagar1974@xxxxxxxxxxx] > > Sent: Tuesday, March 04, 2003 5:38 AM > > To: msexchange@xxxxxxxxxxxxx > > Subject: [msexchange] Re: Upgrade Exchange 5.5 to > > Exchange 2K=3D20 > >=20 > >=20 > >=20 > > Hi Eric, > > You can find that article in the following link > > as=3D20 > > Jim Kenzig said : > > > http://support.microsoft.com/default.aspx?scid=3D3Dkb%3Ben-us%3B326234 > >=20 > > but you can find more information in this link : > >=20 > > > http://www.microsoft.com/exchange/techinfo/interop/55.asp > >=20 > > In addition I found that there is no difference > > between In_Place and move mailbox method. After > > upgradin with move mailbox I'm unable to get email > > from the internet too, I'm sure that there is > > something wrong in upgrade process. I think that > > there > > might be some configuration in exchage 2K that I > > should do . > > Please help me. > >=20 > > --- "Garrison, Eric" <ericgarrison@xxxxxxxxxxx> > > wrote: > > >=3D20 > > > Would you happen to still have this document? Or > > > tell me where I can obtain > > > it? > > >=3D20 > > > -----Original Message----- > > > From: kimiagar kimiagar > > > [mailto:kimiagar1974@xxxxxxxxxxx]=3D20 > > > Sent: Saturday, March 01, 2003 7:45 AM > > > To: msexchange@xxxxxxxxxxxxx > > > Subject: [msexchange] Upgrade Exchange 5.5 to > > > Exchange 2K=3D20 > > >=3D20 > > >=3D20 > > >=3D20 > > > Hi all, > > > I want to upgrade Exchange 5.5 to Exchange 2K , > > > everything is ok except that I can't receive > email > > > from internet. > > > I receive this error : unable to relay > > test@xxxxxxx > > > My server specification is : Windows NT 4.0 > (PDC), > > > Exchange 5.5 , SP4.0 and I use In-Place method > for > > > upgrade process. > > > The exchange site name is xxx.com and when I > want > > to > > > upgrade it , I have to change the site name and > > > delete > > > the invalid character.So I just change the site > > > display name to xxxcom and internal site name is > > > still > > > xxx.com. > > > I think that the main problem is changing my > site > > > name > > > because when I install a fresh exchange 2K with > > the > > > same settings > > > everything is ok and I can receive email from > > > internet. > > > I use this document : In-Place Upgrade from > > > Microsoft > > > Exchange 5.5 to Microsoft Exchange 2000 White > > Paper > > > as > > > a reference. > > > Any help will be appreciated. > > >=3D20 > > >=3D20 > > > > __________________________________________________ > > > Do you Yahoo!? > > > Yahoo! Tax Center - forms, calculators, tips, > more > > > http://taxes.yahoo.com/ > > >=3D20 > > >=3D20 > > > > > > =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= > 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D > > > Use the below link for Archives, > > > and to set your preferences. > > >=3D20 > > > http://thethin.net/exchangelist.cfm > > >=3D20 > > > *****This email and any files transmitted with > it > > > are confidential and are > > > intended solely for the use of the individual or > > > entity to whom they are > > > addressed. This communication represents the > > > originator's personal views and > > > opinions, which do not necessarily reflect those > > of > > > Laughlin Memorial > > > Hospital. If you are not the original recipient > or > > > the person responsible > > > for delivering the email to the intended > > recipient, > > > be advised that you have > > > received this email in error, and that any use, > > > dissemination, forwarding, > > > printing, or copying of this email is strictly > > > prohibited. If you received > > > this email in error, please immediately notify > > > support@xxxxxxxxxxx > > >=3D20 > > >=3D20 > > > > > > =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= > 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D > > > Use the below link for Archives, > > > and to set your preferences. > > >=3D20 > > > http://thethin.net/exchangelist.cfm > >=20 > >=20 > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Tax Center - forms, calculators, tips, more > > http://taxes.yahoo.com/ > === message truncated === __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ ===================== Use the below link for Archives, and to set your preferences. http://thethin.net/exchangelist.cfm