If your users are going to use SMTP, then you need to allow relay for = those users. Any particular reasone why your users do not use MAPI? = The MAPI client(Outlook) is much more feature rich. If it's just = POP3/IMAP/SMTP, there are much more cost effective ways to implement = than Exchange 2k. Joe -----Original Message----- From: kimiagar kimiagar [mailto:kimiagar1974@xxxxxxxxxxx] Sent: Wednesday, March 05, 2003 12:50 AM To: msexchange@xxxxxxxxxxxxx Subject: [msexchange] Re: Upgrade Exchange 5.5 to Exchange 2K=20 Hi Joe, My users use POP3/IMAP/SMTP and I'v looked at my recipient policy . It seems that everything is ok. But after installation via both ways (In_place & move mailbox),there will be 2 policies in recipient policy. One of them is default policy and the other one is a policy whose name is similar to my exchange 5.5 display name and this policy has high priority.=20 but in both of these policies the smtp address is correct. for example: mycompany.com=20 Thanks for your attention. --- Joe Shonk <JShonk@xxxxxxxxxxxxxx> wrote: >=20 > There is difference between an in place upgrade and > move mailbox method. =3D > For one, you can rebuild the original. In place > upgrades are =3D > nortorious for having issues. (need I mention the > reason the upgrade CD =3D > has a Rev A???) >=20 > As far as SMTP, have you looked at your recipient > policy to make sure =3D > the correct domain addresses are being generated for > your users? >=20 > Are your users use the MAPI client? or > POP3/IMAP/SMTP? >=20 > Joe >=20 > -----Original Message----- > From: kimiagar kimiagar > [mailto:kimiagar1974@xxxxxxxxxxx] > Sent: Tuesday, March 04, 2003 5:38 AM > To: msexchange@xxxxxxxxxxxxx > Subject: [msexchange] Re: Upgrade Exchange 5.5 to > Exchange 2K=3D20 >=20 >=20 >=20 > Hi Eric, > You can find that article in the following link > as=3D20 > Jim Kenzig said : > http://support.microsoft.com/default.aspx?scid=3D3Dkb%3Ben-us%3B326234 >=20 > but you can find more information in this link : >=20 > http://www.microsoft.com/exchange/techinfo/interop/55.asp >=20 > In addition I found that there is no difference > between In_Place and move mailbox method. After > upgradin with move mailbox I'm unable to get email > from the internet too, I'm sure that there is > something wrong in upgrade process. I think that > there > might be some configuration in exchage 2K that I > should do . > Please help me. >=20 > --- "Garrison, Eric" <ericgarrison@xxxxxxxxxxx> > wrote: > >=3D20 > > Would you happen to still have this document? Or > > tell me where I can obtain > > it? > >=3D20 > > -----Original Message----- > > From: kimiagar kimiagar > > [mailto:kimiagar1974@xxxxxxxxxxx]=3D20 > > Sent: Saturday, March 01, 2003 7:45 AM > > To: msexchange@xxxxxxxxxxxxx > > Subject: [msexchange] Upgrade Exchange 5.5 to > > Exchange 2K=3D20 > >=3D20 > >=3D20 > >=3D20 > > Hi all, > > I want to upgrade Exchange 5.5 to Exchange 2K , > > everything is ok except that I can't receive email > > from internet. > > I receive this error : unable to relay > test@xxxxxxx > > My server specification is : Windows NT 4.0 (PDC), > > Exchange 5.5 , SP4.0 and I use In-Place method for > > upgrade process. > > The exchange site name is xxx.com and when I want > to > > upgrade it , I have to change the site name and > > delete > > the invalid character.So I just change the site > > display name to xxxcom and internal site name is > > still > > xxx.com. > > I think that the main problem is changing my site > > name > > because when I install a fresh exchange 2K with > the > > same settings > > everything is ok and I can receive email from > > internet. > > I use this document : In-Place Upgrade from > > Microsoft > > Exchange 5.5 to Microsoft Exchange 2000 White > Paper > > as > > a reference. > > Any help will be appreciated. > >=3D20 > >=3D20 > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Tax Center - forms, calculators, tips, more > > http://taxes.yahoo.com/ > >=3D20 > >=3D20 > > > =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D > > Use the below link for Archives, > > and to set your preferences. > >=3D20 > > http://thethin.net/exchangelist.cfm > >=3D20 > > *****This email and any files transmitted with it > > are confidential and are > > intended solely for the use of the individual or > > entity to whom they are > > addressed. This communication represents the > > originator's personal views and > > opinions, which do not necessarily reflect those > of > > Laughlin Memorial > > Hospital. If you are not the original recipient or > > the person responsible > > for delivering the email to the intended > recipient, > > be advised that you have > > received this email in error, and that any use, > > dissemination, forwarding, > > printing, or copying of this email is strictly > > prohibited. If you received > > this email in error, please immediately notify > > support@xxxxxxxxxxx > >=3D20 > >=3D20 > > > =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D > > Use the below link for Archives, > > and to set your preferences. > >=3D20 > > http://thethin.net/exchangelist.cfm >=20 >=20 > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ >=20 >=20 > =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D > Use the below link for Archives, > and to set your preferences. >=20 > http://thethin.net/exchangelist.cfm >=20 >=20 > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > Use the below link for Archives, > and to set your preferences. >=20 > http://thethin.net/exchangelist.cfm __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Use the below link for Archives, and to set your preferences. http://thethin.net/exchangelist.cfm ===================== Use the below link for Archives, and to set your preferences. http://thethin.net/exchangelist.cfm