[modeleng] Re: was boiler making now bandsaws
- From: "shep" <shep.28@xxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Thu, 12 Jan 2006 17:52:39 -0000
Hi Ron
I have made the desired modifications to the vertical table. I have some
pictures which might interest you, but I do not have your email address.
Cheers! Hubert
----- Original Message -----
From: "Ron Head" <ron.head@xxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Sunday, January 08, 2006 2:18 PM
Subject: [modeleng] Re: was boiler making now bandsaws
> Hi Hubert
>
> I'm glad you saw the light! Don't forget to keep a supply of spare
> blades,
> 10TPI for wood, 14TPI for metal bars and 24TPI for thin sheets will see
> you
> through. I always buy my blades from Axminster, they seem to be good
> quality and reasonably priced. I've never worn a blade out, I usually
> have
> to change them when they start losing teeth here and there.
>
> Fitting an improved table is a good idea, and I keep meaning to do this
> myself when I can get around to it. I'd certainly be interested to see
> any
> pictures when you've completed your modifications.
>
> The first thing I did on mine was to fit a waterproof cover to stop
> coolant
> getting into the start/stop switch! This is just a piece of thick
> polythene, folded around the switch body and wired into place - simple and
> effective.
>
> Regards
> Ron
>
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
