[modeleng] Re: FW: Rail Accident Investigation alert: RAIB investigation - Kirklees
- From: "R.L. Roebuck" <rlr20@xxxxxxxxxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Fri, 29 Jul 2011 10:33:08 +0100 (BST)
Although there look to be several things you could highlight...does it
suggest the fusible plug wasn't big enough?
Yours,
Rich.
On Fri, 29 Jul 2011, John Browning wrote:
> Whoops!
>
> Sorry guys,
>
> Here's the link
>
> http://www.raib.gov.uk/publications/current_investigations_register/110703_kirklees.cfm
>
> Regards,
>
> John
>
>
>> From: peter.cathcart@xxxxxxxxxxxxx
>> To: modeleng@xxxxxxxxxxxxx
>> Subject: [modeleng] Re: FW: Rail Accident Investigation alert: RAIB
>> investigation - Kirklees
>> Date: Fri, 29 Jul 2011 09:46:34 +0100
>>
>> John
>>
>> There is no link in the email!
>>
>> Must be a variation of Rule 3!
>>
>> Peter
>>
>>
>> -----Original Message-----
>> From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
>> On Behalf Of John Browning
>> Sent: 29 July 2011 09:19
>> To: modeleng@xxxxxxxxxxxxx
>> Subject: [modeleng] FW: Rail Accident Investigation alert: RAIB
>> investigation - Kirklees
>>
>> Members of this list may well be interested in the following.
>>
>> John
>>
>>
>>
>>
>> Date: Fri, 29 Jul 2011 09:08:11 +0100
>> From: alert@xxxxxxxxxxx
>> To: jgb7573@xxxxxxxxxxx
>> Subject: Rail Accident Investigation alert: RAIB investigation - Kirklees
>>
>>
>> Rail Accident Investigation alert: RAIB investigation - Kirklees
>> Dear subscriber,
>>
>> The RAIB is carrying out an investigation into an incident which occurred on
>> the Kirklees Light Railway near Huddersfield, in Yorkshire.
>>
>> Click here to read the full article on the Rail Accident Investigation
>> Website.
>>
>> This email is generated from the Rail Accident Investigation alert service.
>> If you wish to unsubscribe from this email group, then follow this link:
>> Unsubscribe
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>> line.
>>
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>> line.
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
