[Lugge] Re: problema softmodem

  • From: Alessandro V <speleoalex@xxxxxxxxxxxxx>
  • To: lugge@xxxxxxxxxxxxx
  • Date: Sun, 21 Dec 2003 14:18:25 +0000

Il cavo che uso per il modem è lo stesso di quello del telefono.
Ho poi un  altro telefono che uso quando voglio vedere se il numero viene 
composto veramente dal modem  ma niente.
Ho avviato il driver in debug mode e a quanto sembra il driver genera i toni 
in uscita ma sulla linea non si sentono.

ecco l'output del driver di un tentativo di connessione :

[alessandro@ntb-alex alessandro]$ su
Password:
[root@ntb-alex alessandro]# killall slmodemd
[root@ntb-alex alessandro]# slmodemd -d=2
SmartLink Soft Modem: version 2.9.2 Dec 20 2003 11:48:23
<096.579734> slamr0: startup modem...
<096.579818> slamr0: update termios...
modem `slamr0' created. TTY is `/dev/pts/0'
symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
<096.600132> open file: /var/lib/slmodem/data.slamr0...
main: rt applyed: SCHED_FIFO, pri 99
main: termios changed.
<128.645017> slamr0: update termios...
<130.201481> slamr0: run cmd: ATZ
<130.201508> slamr0: modem reset...
<130.201512> slamr0: modem set state: 1 --> 1...
<130.201520> slamr0: modem report result: 0 (OK)
<131.251241> slamr0: run cmd: ATX3
<131.251273> slamr0: modem report result: 0 (OK)
<131.763641> slamr0: run cmd: ATM1L3
main: modemap_ioctl: cmd 8, arg 0...
main: modemap_ioctl: cmd 8, arg 0...
<131.763686> slamr0: modem report result: 0 (OK)
<132.291369> slamr0: run cmd: ATDT0104001010
<132.291402> slamr0: modem dial: T0104001010...
<132.291407> slamr0: do_modem_start..
<132.291411> slamr0: modem set state: 1 --> 2...
<132.291417> slamr0: new state: DP_ESTAB
main: modemap_ioctl: cmd 4, arg 2580...
main: modemap_ioctl: cmd 7, arg 60...
main: modemap_ioctl: cmd 8, arg 3...
<132.291434> slamr0: modem set hook: 0 --> 1...
main: modemap_ioctl: cmd 2, arg 1...
main: modemap_start...
<132.297647> slamr0: 96: change dp: --> 2...
<132.297675> call: create...
<132.297684> CallProgFP_Create >>
<132.297689> APPLY_FILTER = 0
<132.297695> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96
<132.297700> ============> 6
<132.297704> Cadence: Busy Tone loose detection is 0
<132.297711> TYPE BUSY
<132.297715> Filter index 6
<132.297718> Filter SubIndex 0
<132.297722> MAX_ON_TIME 30 Buffers     MIN_ON_TIME 9 Buffers
<132.297726> MAX_OFF_TIME 30 Buffers    MIN_OFF_TIME 9 Buffers
<132.297730> OFF_TIME_THAT_RESETS_CYCLE 90
<132.297734> BUFFER LENGTH 160 samples.
<132.297738> INTEGRATION_LENGTH 0[ms]
<132.297741> LEVEL 96
<132.297749> INTEGRATION_TIME = 0 Buffers.
<132.297755> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96
<132.297760> TYPE DIAL
<132.297764> Filter index 5
<132.297767> Filter SubIndex 0
<132.297771> MAX_ON_TIME 0 Buffers     MIN_ON_TIME 0 Buffers
<132.297775> MAX_OFF_TIME 0 Buffers    MIN_OFF_TIME 0 Buffers
<132.297779> OFF_TIME_THAT_RESETS_CYCLE 0
<132.297783> BUFFER LENGTH 666 samples.
<132.297787> INTEGRATION_LENGTH 2500[ms]
<132.297790> LEVEL 96
<132.297795> INTEGRATION_TIME = 28 Buffers.
<132.297802> CALLPROG Create <<
<132.297805> CALLPROG Dialing T0104001010
<132.297811> Configuration->tone_DigitLength 100
<132.297815> Configuration->pulse_OffHookTime 36
<132.297819> Configuration->pulse_OnHookTime 64
<132.297822> Configuration->dialPauseTime 2
<132.297826> Configuration->flashTime 50
<132.297830> Configuration->toneOrPulseFlag 0
<132.297834> Configuration->dialModifierValidationFlag 0
<132.297838> Configuration->ABCD_PermittedFlag 0
<132.297842> Configuration->pulseAndToneInSameStringPermittedFlag 0
<132.297846> Configuration->callingToneFlag 0
<132.297849> Configuration->commaPauseDurLimit 255
<132.297853> Configuration->digitPattern 1
<132.297857> Configuration->tone_BetweenDigitsInterval 100
<132.297861> Configuration->pulse_BetweenDigitsInterval 800
<132.297865> DTMF_Gain1 = 13014
<132.297868> DTMF_Gain2 = 16384
<132.297872> call: SetPulseMakeTime 36
<132.297876> call: SetPulseBreakTime 64
<132.297880> AnalyzeDialString: Updated 17 May 1999 00:50
<132.297884> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 10
<132.297889> Dial String Syntax is VALID
<132.297899> GetNoAnswerTimeOut. 60
<132.297903> BlindCall: GetBlindDialPause = 2 .
<132.297908> CALLPROG_Dial was exited.
<132.297911> call: create RC: 9600 <-> 8000...
<132.300663> call: process: msg 18 --> 0
<133.251603> DCR: initial DC Evaluation done, DC level 0, enabled
<133.500600> CALLPROG: Time out
<133.500628> STATE:  CALLPROG_WAIT_DIAL --> CALLPROG_DIALING
<133.500640> call: process: msg 0 --> 3
<133.503613> DIALER_INITIAL_STATE
<133.503627> Digit is T
<133.503631> Dialer.c: GetNextDigit... TONE_OR_PULSE_FLAG became TONE_DIALING
<133.503636> Digit is 0
<133.503640> Samples left = 800
<133.503655> call: process: msg 3 --> 0
<133.560601> Done Generating digit
<133.620599> Done Generating silence between digits
<133.620627> Digit is 1
<133.620632> Samples left = 800
<133.680600> Done Generating digit
<133.740597> Done Generating silence between digits
<133.740624> Digit is 0
<133.740629> Samples left = 800
<133.800596> Done Generating digit
<133.860594> Done Generating silence between digits
<133.860621> Digit is 4
<133.860625> Samples left = 800
<133.920595> Done Generating digit
<133.980592> Done Generating silence between digits
<133.980619> Digit is 0
<133.980623> Samples left = 800
<134.040593> Done Generating digit
<134.100590> Done Generating silence between digits
<134.100618> Digit is 0
<134.100622> Samples left = 800
<134.160590> Done Generating digit
<134.220587> Done Generating silence between digits
<134.220614> Digit is 1
<134.220618> Samples left = 800
<134.280587> Done Generating digit
<134.340585> Done Generating silence between digits
<134.340611> Digit is 0
<134.340616> Samples left = 800
<134.400585> Done Generating digit
<134.460582> Done Generating silence between digits
<134.460610> Digit is 1
<134.460615> Samples left = 800
<134.520583> Done Generating digit
<134.580580> Done Generating silence between digits
<134.580609> Digit is 0
<134.580614> Samples left = 800
<134.640581> Done Generating digit
<134.643585> DIALER_END_STATE
<134.643595> STATE:  CALLPROG_DIALING --> CALLPROG_WAIT_RING
<134.643607> call: process: msg 0 --> 4
<134.646602> call: process: msg 4 --> 0
<170.645884> CALLPROG: Time out
<170.645914> STATE:  CALLPROG_WAIT_RING --> CALLPROG_END
<170.645935> call: process: msg 0 --> 1
<170.645941> slamr0: modem_update_status: 64
<170.645945> slamr0: --> FINISH.
<170.645949> slamr0: modem_hup...
<170.645953> slamr0: modem set state: 2 --> 9...
<170.645957> slamr0: new state: DP_DISC
<170.645962> slamr0: do_modem_stop..
main: modemap_stop...
<170.645987> slamr0: modem set hook: 1 --> 0...
main: modemap_ioctl: cmd 2, arg 0...
main: modemap_ioctl: cmd 8, arg 0...
<170.646036> call: delete...
<170.646041> Dialer was aborted.
<170.646044> CALLPROG_Delete is entered
<170.646047> cadence_delete with CADENCE_DIAL_OBJ is invoked
<170.646052> cadence_delete with CADENCE_OBJ is invoked
<170.646056> CALLPROG_Delete is exited
<170.646061> slamr0: modem set state: 9 --> 1...
<170.646064> slamr0: new state: MODEM_IDLE
<170.646068> slamr0: modem report result: 8 (NO ANSWER)
main: dev write = 0
main: termios changed.
<190.054877> slamr0: update termios...
main: pty closed.



 
Alle 10:13, domenica 21 dicembre 2003, Sergio ha scritto:
> Hai provato a connettere un telefono alla linea che usi per il modem
> (usando lo stesso cavo telefonico)?
> Con quello si sente il segnale di "libero"?
>
>       Sergio
>

========----------

 Prima di scrivere in m-list per favore leggi il regolamento
 http://www.lugge.net/soci/index.php?link=manifesto

 Archivio delle e-mail postate in lista
 http://www.freelists.org/archives/lugge/

 Modifica dell'account sulla lista LUGGe
 http://www.lugge.net/soci/index.php?link=manifesto.htm#list


Other related posts: