Aminos only really work for a few protocols and with low latency. We are
using two with no issues. One decoding our ThisTV feed from the udp network
output from the receiver on a Wireless lan (had too much interference on
one of our cband dishes at studio, so had to receive it at our tower site
and send back to studio via wireless lan). The amino picks it up and
haven't touched it.
We use another for a local church who leases a channel from us. They send a
udp signal from a 1 channel PVI encoder over internet to our amino box. We
never have to touch it.
If however you use them to open an HLS stream, they are horrible. They
will lock up all the time.
Gil Reynolds
VP / Station Manager
Hometown Television:
XL7-TV (K07XL Mtn. Home)
K26-TV (K26GS Harrison)
Over the Air - Ch 26 | COX – Ch 843 | Suddenlink – Ch 22 | Ritter – Ch 22,
26.1-26.7 | Yelcot - Ch 70-75 | Natco - Ch 27-33
1226 Commerce Drive
Mountain, Home, AR 72653
Office: 870-424-6957
Cell 870-391-6060
HometownTV.net

On Thu, Jan 7, 2021, 8:30 AM Norm Kaiser <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Hi Maureen:
Very interesting that you said that.
In our experience Amino 140s were a complete disaster. Right Now TV almost
went out of business because of them. Entirely unreliable. Junk.
We had to develop our own decoder in-house to replace the Aminos. I have
an Amino right here in my closet that I'm going to take out to the shooting
range and use as target practice!
Norm Kaiser - Manager of Business Development
*RIGHTNOWTV*
http://www.RightNowTelevision.com
norm.kaiser@xxxxxxxxxxxxxx
On Thursday, January 7, 2021, 04:45:38 AM CST, Maureen Cooper <
dmarc-noreply@xxxxxxxxxxxxx> wrote:
I bought around four thousand dollars into Thor boxes for a few affiliate
stations for a previous network, years ago though, but they did not work,
period. Thor agreed they were unable to get them to work, on a couple low
power stations. However, when we returned them, they kept one thousand
dollars, and said there was a scratch on one of the boxes and only
returned $3k back to me.
We have spent the last two years testing all kinds of everything
imaginable for a simple master control and we found a great scheduling
system and signal works great. We have come back to the very functional,
inexpensive and sturdy great decoder - Amino H140 or A140.
I feel like Amino always works.
Sincerely,
Maureen Cooper
Program Director, Simultv
Maybacks/Holyfield TV Networks
(o)520-252-0263
www.iHolyfieldtv.com
www.Simultv.com
www.maybacksglobal.com
On Tuesday, January 5, 2021, 01:58:37 PM PST, Jon C. Moon <
jonmoon@xxxxxxxxxxxxxxx> wrote:
I use a Blonder-Tongue encoder like Rebecca linked to and the good thing
about those units is that they also have EAS inputs. Even if you're doing
two channels of HD, you can still utilize your old SD EAS unit. You can
run the video out from older EAS unit right into the EAS video/audio inputs
on the BT encoder. It's not going to be a crawl superimposed over your
programming video, but it will keep your station legal.
Jon C. Moon
Ridgeline TV Channel 99
706-897-0872
www.ridgelinetv.net
On Jan 3, 2021, at 5:40 PM, Keith Leitch <keith@xxxxxxxxx> wrote:
Hi Rebecca,
One like this with HD-SDI inputs. Make an offer on eBay for half the
asking price:
https://www.ebay.com/itm/Blonder-Tongue-Laboratories-HDE-2H-2S-QAM-HD-Encoder-2-HDMI-2-HD-SDI-QAM/143669399942?hash=item21735d1186:g:rbAAAOSwdwpfIxZ0
Blessings,
Keith
Get Outlook for iOS <https://aka.ms/o0ukef>
------------------------------
*From:* lptv-bounce@xxxxxxxxxxxxx <lptv-bounce@xxxxxxxxxxxxx> on behalf
of Rebecca White <wrlwtv@xxxxxxxxx>
*Sent:* Sunday, January 3, 2021 2:21:53 PM
*To:* lptv@xxxxxxxxxxxxx <lptv@xxxxxxxxxxxxx>
*Subject:* [lptv] Re: Digital to Analog to Digital
<IMG_1162.jpg>
Is this what you’re referring to?
On Sun, Jan 3, 2021 at 12:11 PM Keith Leitch <keith@xxxxxxxxx> wrote:
Hi,
There is no need to get a Thor Encoder. Instead, just search eBay
periodically for "Blonder Tongue", and you'll find nice HD encoders with
two HD program sources for $300.
I'm an avid eBay buyer. When I find equipment that works, I search eBay
periodically for it.
Be Blessed in the New Year!
Keith
------------------------------
*From:* lptv-bounce@xxxxxxxxxxxxx <lptv-bounce@xxxxxxxxxxxxx> on behalf
of Rick Goetz <rickg@xxxxxxxxxxxxxxxxxx>
*Sent:* Sunday, January 3, 2021 8:03 AM
*To:* lptv@xxxxxxxxxxxxx <lptv@xxxxxxxxxxxxx>
*Subject:* [lptv] Re: Digital to Analog to Digital
Can modulate multiple programs on the same frequency - carrier
No,
each program needs to be modulated on a separate frequency
Something else to look at on the low-cost units such as the Thor Thunder
is many do not multiplex the streams into one channel. So channel 1 might
be RF channel 14, channel 2 is RF channel 16, etc. Great when doing a small
system for a home, hospital or hotel, but will not work for what we do.
Rick Goetz
R & L Media Systems
(615) 826-0792
rickg@xxxxxxxxxxxxxxxxxx
*From:* lptv-bounce@xxxxxxxxxxxxx [mailto:lptv-bounce@xxxxxxxxxxxxx] *On
Behalf Of *craigf199 (Redacted sender "craigf199" for DMARC)
*Sent:* Saturday, January 2, 2021 7:05 PM
*To:* lptv@xxxxxxxxxxxxx
*Subject:* [lptv] Re: Digital to Analog to Digital
From looking over the specs below, this unit, as a modulator, looks like
it's designed purposely just for closed-circuit cable operation as it has
only a 75-ohm RF output (picture on website) and not an ASI output normally
used to feed a transmitter's exciter.
It doesn't mention having any EAS capability and has no linear or
non-linear distortion correction meaning it would only work with a very low
efficiency Class A linear amplifier and wouldn't have any ability to
correct for mask filter distortion.
Also, it doesn't mention being able to caption EIA-708, just 608 and for
any CC you would need to have a source that already has Line 21 CC
available. That has mostly become a thing of the past.
So yes, it's ATSC, but not designed for broadcasting.
- *1-8 HDMI channels Inputs (model dependent) *
- *HDCP compliant works with any HDMI source like DVD Player or Cable,
Satellite STB up to 1080p/60 resolution *
- *MPEG2 Video Encoding*
- *1080p/60, 1080i, 720p, 576i, 480i Video Resolution *
- *Low Latency (50~100ms)*
- *MPEG layer 2, AAC, and DD AC3 Audio Encoding *
- *CC (Closed Caption), EIA 608*
- *LCN*
- *DVB-C DIGITAL QAM, ATSC, DVB-T, ISDB-T RF in one device, Modulation
dynamic switching*
- *Control Via Web-Based NMS, and easy updates Via Web*
- *LCD Display and front panel control *
Craig Fox
WTVU/WIXT
Syracuse, NY
___________________________________________________________________
-----Original Message-----
From: Norm Kaiser <dmarc-noreply@xxxxxxxxxxxxx>
To: lptv@xxxxxxxxxxxxx <lptv@xxxxxxxxxxxxx>
Sent: Fri, Jan 1, 2021 3:00 pm
Subject: [lptv] Re: Digital to Analog to Digital
Hi Dan...yes, this makes sense. The encoder I linked to has an input for
composite video in to get the closed captions from and the device doesn't
appear to be all that expensive.
Norm Kaiser - Manager of Business Development
*RIGHT**NOW**TV*
http://www.RightNowTelevision.com ;<http://www.rightnowtelevision.com/>
norm.kaiser@xxxxxxxxxxxxxx
On Thursday, December 31, 2020, 08:59:38 PM CST, Dan Peek <
dan.peek@xxxxxxxx> wrote:
For all the afore mentioned reasons plus the fact that sadly HDMI doesn't
pass closed captions. So just converting it to SDI leaves it without
embedded closed captions that the consumer TV can decode or not decode.
Some HDMI encoders take composite on the side for closed caption
embedding.
Sometimes HDMI from consumer devices won't talk directly to encoders.
Usually an HDMI splitter remove the copyright stuff and solve that problem.
Dan
On Thu, Dec 31, 2020, 1:46 PM Norm Kaiser <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Hi Craig!
Thanks for the reply.
We do provide either a BlackMagic HDMI to SDI converter or composite
converter to our affiliates...but it just seems like such a crying shame to
take a clean digital output, convert it to analog, only to convert it back
again.
Would a device like the one below solve the issue?
Econonical HDMI HDCP modulator QAM ATSC DVB-T ISDB-T
<https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/236?gclid=CjwKCAiAirb_BRBNEiwALHlnD9a6jwk_heizZOEn5gUMPcNRAPngQIh3Owd1BNIgW6AL6F-6PQGo8xoCbaQQAvD_BwE>
Econonical HDMI HDCP modulator QAM ATSC DVB-T ISDB-T
1 to 8 HDMI Digital RF Modulator with Closed Captioning is an all in one
device integrating MPEG2 encoding and m...
Norm Kaiser - Manager of Business Development
*RIGHT**NOW**TV*
http://www.RightNowTelevision.com ;<http://www.rightnowtelevision.com/>
norm.kaiser@xxxxxxxxxxxxxx
On Thursday, December 31, 2020, 12:44:27 PM CST, craigf199 <
dmarc-noreply@xxxxxxxxxxxxx> wrote:
Norm,
Two reasons: Most broadcast encoders need an SDI signal via a BNC
connection as that would normally embed video, audio and CC. However, most
of everyone's EAS encoders still need a composite signal in which the
signal feeds through the EAS unit to overlay the video/audio EAS tones and
messages if it's the primary program for the station.
And yes, to answer your last question, most folks do not have direct HDMI
encoders as that isn't a broadcast standard configuration.
For your programming, anyone needing or wanting SDI would need an HDMI to
SDI converter like a BlackMagic Design HDMI to SDI Mini Converter. For
HDMI to analog, there are a number of very inexpensive (approx. $35) models
from Radio Shack or Parts Express, RCA, etc.
Craig Fox
WTVU/WIXT
Syracuse, NY
_____________________________________________________________
-----Original Message-----
From: Norm Kaiser <dmarc-noreply@xxxxxxxxxxxxx>
To: lptv@xxxxxxxxxxxxx <lptv@xxxxxxxxxxxxx>
Sent: Thu, Dec 31, 2020 12:52 pm
Subject: [lptv] Digital to Analog to Digital
Hi folks!
I was hoping everyone could help me understand some LPTV basics.
I've been partner now in a diginet for over two years. One thing I'm not
understanding is the fact that almost all of our affiliate stations, when
we go to ship them our playback device, almost all of them request a
composite output.
Composite is analog.
The output of the playout device is digital HDMI.
The broadcast standard is digital.
So aren't the affiliates taking a digital output, converting it to analog,
then converting it back to digital again?
Why is this done? Is it because many folks don't have HDMI encoders?
Thanks!
Norm
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
