[leveller] Re: Tablet survey
- From: "Mick" <mick28@xxxxxxxxx>
- To: <leveller@xxxxxxxxxxxxx>
- Date: Wed, 2 Feb 2005 07:34:52 -0000
Ditto for me, although I have a Wacom with no tilt angle sensor I find
Adobe Photoshops support for pressure sensitivity, together with the
option to turn it off completely, more than satisfactory and would love
to see the same support in leveller.
Mick
-----Original Message-----
From: leveller-bounce@xxxxxxxxxxxxx
[mailto:leveller-bounce@xxxxxxxxxxxxx] On Behalf Of Oshyan Greene
Sent: 02 February 2005 02:17
To: leveller@xxxxxxxxxxxxx
Subject: [leveller] Re: Tablet survey
I'm the owner of a somewhat older Wacom Intuos and standard 2 button +
tip and eraser pen (4 "buttons" total). Ideally I would like to see a
similar level of support to that provided by Photoshop, where you can
control
*multiple* aspects of a given brush/tool with the various sensing styles
and buttons/inputs of the tablet and pen.
The two major sensing abilities of my particular tablet are pressure and
tilt angle. There is also the difference between the tip and eraser, as
well as the two buttons to contend with. The buttons are usually
assigned standard mouse functions like left and right click, but it
might be nice to have a mode in Leveller that could support specific
Leveller functions for them (undo, redo perhaps?), if that's possible.
In Photoshop you can assign pen pressure to things like brush width,
opacity, saturation, lightness, scattering, and more, and you can even
assign 1 sensor input to multiple controls, so the harder you pressed
the wider *and* darker a brush stroke will be. I find this functionality
*extremely* useful.
Is it particularly difficult to create this kind of generalized system,
where the program takes multiple sensor inputs from the device and can
assign them to multiple functions of the program? If so my general
preference would be for "brush/effect strength" to be associated with
pressure. In tools that have no "strength", it should be associated with
another logical parameter like width.
- Oshyan
> -----Original Message-----
> From: leveller-bounce@xxxxxxxxxxxxx
> [mailto:leveller-bounce@xxxxxxxxxxxxx]
> On Behalf Of Ray Gardener
> Sent: Tuesday, February 01, 2005 5:35 PM
> To: leveller@xxxxxxxxxxxxx
> Subject: [leveller] Tablet survey
>
> I want the next version to explicity support graphics tablets, so to
> be safe I wanted to poll those users who have these devices to get
> their opinion as to device brand and how they would prefer the
> integration to work (e.g., pressure sensitivity means such-and-such,
> etc.).
>
> Thanks in advance,
> Ray
Other related posts:
