Hi, Douglas, I will report my results this very evening after I get my first B&W test roll developed... But so far, playing with the flash in A mode, I could detect without a doubt that the flash light outpus varies with the distance / aperture / bounce /.... Best regards, Miha 2009/1/8 Douglas Sharp <douglas.sharp@xxxxxx> > Hi, Miha, > > I think it will actually be proved who is right when you get the flash > shots developed and printed - I have a slight suspicion that the SCA 3102 > may cut out the sensor in the flash because it's expecting SCA compatibility > and TTL metering. That the flash is triggered is one thing - whether it is > emitting the correct amount of light is quite another. > > Cheers > Douglas - hoping it does work for you > > Miha Golobic wrote: > >> It looks like the expert opinion from the Flexers is more valid..... >> This is the answer I got from Metz. >> Regars, Miha >> /Dear Mr. Golobic,/ >> /Many thanks for your e-mail enquiry of 07. Jan. 2009./ >> /The mentioned flash unit mecablitz 32 MZ-3 also can be used in connection >> with the camera Leica R3. For this we recommend to equip the flash unit with >> the centre contact foot 301. The adapter SCA 3102 can't be used with the >> afore-mentioned camera. With this adapter the flash unit can't be >> triggered./ >> /We hope we could be in assistance to you and remain >> with best regards/ >> /Roland Laemmermann >> Technical support/ >> >> // >> // / / >> >> >> 2009/1/7 Miha Golobic <miha.golobic@xxxxxxxxx <mailto: >> miha.golobic@xxxxxxxxx>> >> >> Hi all, >> I got the Metz today and it feels great atop my R3! >> Thanks again, >> Miha >> >> >> 2009/1/7 Miha Golobic <miha.golobic@xxxxxxxxx >> <mailto:miha.golobic@xxxxxxxxx>> >> >> >> Douglas wrote: >> >> /I'm afraid it's back to basics using SCA flashes on your >> R3 - it only has a simple hot shoe and no dedicated flash >> functions - so you'll need the simple hot shoe adapter and >> will not be able to use TTL mode./ >> >> /Either pre-set apertures or manual mode will work./ >> >> / >> / >> >> /I believe they call it the "Standard foot 301", this is >> usually part of the set delivered with the flash./ >> >> >> >> Hi Douglas, >> >> thanks for your input. It has always been basics for me >> (except for the short venture with my F90x and SB28). Metz >> flashes have extremely good thristors. They give you more >> reliable exsposures than primitve TTL cameras (like my Nikon >> FA, or a Leica R5 I guess). >> >> >> >> >> Philippe wrote: >> >> /from what I know Etienne is right ; so long as you have >> the central (larger) pin on the adaptor it should fire the >> flash/ >> >> /Else you might still be able to change the adaptor/ >> >> /I used an SCA 3501 meant for the R8 without problems on >> your camera./ >> >> >> >> /On the R3 your should should at the X setting - or at >> speeds lower than 90th/ >> >> /A is risky in some circumstances/ >> >> >> >> >> Hi Philippe, >> >> thanks for your experience with the SCA 3501. And with the A >> mode I was reffering to the flash A mode. >> >> >> >> Fred wrote: >> >> /Ask Metz for the details:/ >> >> / / >> >> /http://www.metz.de/en/contact/contact-person.html/ >> >> / / >> >> /They will help you perfect>/ >> >> >> >> Thanks Fred, I might not need to ask them any more ;-) >> >> >> Best regard and happy shooting, >> Miha >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> 2009/1/7 Fred Hess <fredhess@xxxxxxxxxxxxxxxxx >> <mailto:fredhess@xxxxxxxxxxxxxxxxx>> >> >> Hello Miha, >> Ask Metz for the details: >> http://www.metz.de/en/contact/contact-person.html >> They will help you perfect> >> Kind regards >> Fred >> >> ----- Original Message ----- >> *From:* Miha Golobic <mailto:miha.golobic@xxxxxxxxx> >> *To:* leicareflex@xxxxxxxxxxxxx >> <mailto:leicareflex@xxxxxxxxxxxxx> >> *Sent:* Tuesday, January 06, 2009 10:31 PM >> *Subject:* [LRflex] Metz 32-MZ3 >> >> Dear members, >> I have a chance to buy a Metz 32-MZ3 with >> the SCA 3102 >> (Canon EOS) adapter for almost nothing. This Metz also >> operates in A mode (I have been using A mode on my >> Metz 45-CL1 exclusively, but this flash unit is very >> cumbersome). >> Can someone tell me If my R3 will trigger >> the flash >> with the SCA 3102 mounted? >> Thank You, >> Miha >> >> >> >> >> ------ > Unsubscribe or change to/from Digest Mode at: > http://www.lrflex.furnfeather.net/ > Archives are at: > //www.freelists.org/archives/leicareflex/ >