About res filter: in the manual (in the VDF section) the filter has two parameters: one is cutoff frequency and the other is COLOR. On the schematic schown in the manual Color seems exactly like resonance (amount of peak at cutoff frequency). I haven't tried it out yet, so I don't know what it sounds like to tweak the color to max (99?) and play with cutoff. I think the parameter number for color is 83. VDF cutoff is 50 (if I remember correctly). Greetings, Blaz ------------------------------------------------- ----- Original Message ----- From: "Nathan" <nateorion@xxxxxxx> To: <korgypark@xxxxxxxxxxxxx> Sent: Wednesday, November 21, 2001 1:00 AM Subject: Re: X5D - G4? > > > Hey thanks for all the help! Those editing programs seem pretty spiffy for the > small amount of time I've had to play with them. > > BTW was someone asking about res/freq filters on the X5D? I discovered that you > can get something very close to a res filter on it if you run it through a > "wah-wah" pedal. I'm using an original cry baby and when I put it one the > SquareWave or SawWave it sounds allot like my Juno-6! So if you happen to have > one you should try it. > Hope this helps! :) > -Nathan > > ---------------------------------------------------------------- > This message was sent through the Korgy Park mailing list. > Mailing list info page: //www.freelists.org/list/korgypark. > > ---------------------------------------------------------------- This message was sent through the Korgy Park mailing list. Mailing list info page: //www.freelists.org/list/korgypark.