[jhb] Re: AI in FSX Query
- From: "Paul Reynolds" <paul@xxxxxxxxxxxxxxxxxxx>
- To: <jhb@xxxxxxxxxxxxx>
- Date: Fri, 18 May 2007 17:13:29 +0100
Would commenting out the lines of addresses stop that object/aircraft etc
loading?
I can't check this yet, in middle of fitting new mobo on FSX machine.
Paul
-----Original Message-----
From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf
Of Gerry Winskill
Sent: 18 May 2007 15:24
To: jhb@xxxxxxxxxxxxx
Subject: [jhb] Re: AI in FSX Query
Sorry to be so dense; the excuse is that I'm trying to get the full 5
monitor setup running, on the other machine, at the same time....don't
ask why!
Anyway, I assume the change is in the Aircraft.cfg files? Which line
specifically, so that I don't add yet another job to my problem solving
list!
BTW, whilst on, in FS9 do we normally leave unticked the hardware
section boxes for Render to Texture and Transform and Lighting?
Gerry Winskill
Paul Reynolds wrote:
>The usual way is to put a semi-colon before the line
>So if it read:
>
>Xyxmgb xregfsklj
>
>It becomes
>
>;Xyxmgb xregfsklj
>
>Paul
>
>-----Original Message-----
>From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On
>Behalf Of Gerry Winskill
>Sent: 18 May 2007 14:53
>To: jhb@xxxxxxxxxxxxx
>Subject: [jhb] Re: AI in FSX Query
>
>
>How do I do that Paul?
>
>Gerry Winskill
>
>
>Paul Reynolds wrote:
>
>
>
>>Dunno about adding in separate lines, but try commenting out the lines
>>for the aircraft etc you don't want, should stop them loading. <g>
>>
>>Paul
>>
>>-----Original Message-----
>>From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On
>>Behalf Of Gerry Winskill
>>Sent: 18 May 2007 12:34
>>To: jhb@xxxxxxxxxxxxx
>>Subject: [jhb] AI in FSX Query
>>
>>
>>Is it possible that the changed FSX structure might allow us to reduce
>>the load, when selecting from the Aircraft Menu ?
>>
>>Looking at FSX.cfg it lists
>>
>>User Objects=Airplane, Helicopter
>>That line is followed by lines of the addresses to Airplanes,
>>Rotorcraft, Ground Vehicles etc.
>>
>>If a folder was made for "AI", all the AI aircraft put into the folder
>>and AI add after Helicopter, on the User Objects line, then an
>>additional address line added, would it be possible to segregate AI
>>aircraft from the flying versions?
>>
>>Any ideas in unmarked envelope.
>>
>>Gerry Winskill
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>
>
>
Other related posts:
