The usual way is to put a semi-colon before the line So if it read: Xyxmgb xregfsklj It becomes ;Xyxmgb xregfsklj Paul -----Original Message----- From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry Winskill Sent: 18 May 2007 14:53 To: jhb@xxxxxxxxxxxxx Subject: [jhb] Re: AI in FSX Query How do I do that Paul? Gerry Winskill Paul Reynolds wrote: >Dunno about adding in separate lines, but try commenting out the lines >for the aircraft etc you don't want, should stop them loading. <g> > >Paul > >-----Original Message----- >From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On >Behalf Of Gerry Winskill >Sent: 18 May 2007 12:34 >To: jhb@xxxxxxxxxxxxx >Subject: [jhb] AI in FSX Query > > >Is it possible that the changed FSX structure might allow us to reduce >the load, when selecting from the Aircraft Menu ? > >Looking at FSX.cfg it lists > >User Objects=Airplane, Helicopter >That line is followed by lines of the addresses to Airplanes, >Rotorcraft, Ground Vehicles etc. > >If a folder was made for "AI", all the AI aircraft put into the folder >and AI add after Helicopter, on the User Objects line, then an >additional address line added, would it be possible to segregate AI >aircraft from the flying versions? > >Any ideas in unmarked envelope. > >Gerry Winskill > > > > > > > > >