I've found that turning off all toolbars can help (can't really figure why, and it can be inconvenient if you need those toolbars). Hth, Chip =20 > -----Original Message----- > From: jfw-bounce@xxxxxxxxxxxxx=20 > [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of ptusing@xxxxxxxxxxxxx > Sent: Friday, June 11, 2004 10:54 PM > To: jfw@xxxxxxxxxxxxx > Subject: Correction sought for reading problems with Word 2 k >=20 > Hi, > Until recently, I had had relative good luck using JAWS=20 > 5.0884 and even much better luck using 4.51 with Word 2 K. >=20 > But now when I down arrow lines can be skipped and are read=20 > using "say all". >=20 > Up arrowing can skip alternating lines. >=20 > When trying to read the missing line, highlighting it can=20 > work most of the time. >=20 > Is there some setting orm eans to get the reading improved? > Thanks very much. >=20 >=20 > -- > To post a message to the list, send it to jfw@xxxxxxxxxxxxx=20 > To unsubscribe from this mailing list, send a message to=20 > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=20 > subject line. > Archives located at: //www.freelists.org/archives/jfw >=20 > If you have any concerns about the list, post received from=20 > the list, or the way the list is being run, do not post them=20 > to the list. Rather contact the list owner at=20 > jfw-admins@xxxxxxxxxxxxxx >=20 -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx