The IP assignment for the three-homed DMZ is a subset of the external IP range. For instance, if your ISA owns a 30-IP range of 123.123.123.33 - .62 with a mask of 255.255.255.224, you could assign IP's 33-47 to the external interface and assign IPs 49 to 62 with a mask of 255.255.255.240 to the DMZ and use 123.123.123.49 for the ISA DMZ NIC. 123.123.123.49 would become the default gateway for any DMZ-based server. The ISA settings would then look like: External - IP = 123.123.123.33 Mask = 255.255.255.224 DG = 123.123.123.xxx (router, or ISP-supplied) DNS = <empty> DMZ - IP = 123.123.123.49 Mask = 255.255.255.240 DG = <empty> DNS = <empty> Internal - IP = 192.168.0.1 Mask = 255.255.255.0 DG = <empty> DNS = <depends on your config> Jim Harrison MCP(2K), A+, Network+, PCG ----- Original Message ----- From: "Guinn Unger" <mlists@xxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Friday, July 27, 2001 11:20 AM Subject: [isalist] IP Addresses on DMZ http://www.ISAserver.org We are trying to set up a DMZ scenario with a web server. We have three NICs in the ISA server. One to the T1, one to the internal network, and one to the DMZ. My question concerns the IP addresses on the DMZ. I assume that one of the public IP addresses needs to be assigned to the NIC in the web server. But what IP address can be used on the NIC in the ISA machine that goes to the DMZ? Is there some additional information about this somewhere? Thanks. Guinn Unger Unger Technologies, Inc. Microsoft Certified Partner Compaq Solutions Alliance Partner geunger@xxxxxxxxxxxxx www.ungertech.com 281-367-2477 Hard work spotlights the character of people: some turn up their sleeves, some turn up their noses, and some don't turn up at all. - Sam Ewig ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')