same thing it just putts them in one over size but i still get the same type of message, error .01 too big. I just thought it was a little annoying.. thanks to all > > From: "Gerry Meier" <gerry.meier@xxxxxxxxxxxxxx> > Date: 2004/06/10 Thu PM 09:43:20 EDT > To: <icu-pcb-forum@xxxxxxxxxxxxx> > Subject: [PCB_FORUM] Re: gnd plane and drc errors > > I have experienced the same thing - try adding a oversize value to the > clearance and it will take care of the problem. I think it's a rounding > error. > > Set the clearance oversize to 1 mil or larger > > Gerry Meier > Sr. PCB Designer > Freedom CAD Services, Inc. > Voice: (603) 864-1300 x1350 > Alt. Voice: (386) 753-0048 > Email: gerry.meier@xxxxxxxxxxxxxx > visit our website at<http://www.freedomcad.com > > > > -----Original Message----- > From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx] > Sent: Thursday, June 10, 2004 9:27 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] gnd plane and drc errors > > > To all gurus: > I have multiple gnds (pwr,signal,earth and shield) and i need to edit all > layer, so i'll change all planes to dynamic shape and let program clear all > via that don't need to be tied. But i always get drc errors, rule says 8 > mils but the opening is 7.99 mils. What gives? after i'm finish i change > shape type back to static and tie all the four types of gnds back together > around board edge. Why do i always get the 7.99 mils? > thanks in advance > Sam > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list please login at > //www.freelists.org. Our list name is icu-pcb-forum > or go to //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > > Want to post a job listing ? DON'T DO IT HERE! > Better yet, join our jobs listing forum. > > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx > POST: icu-jobs-forum@xxxxxxxxxx > ----------------------------------------------------------- > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list please login at > //www.freelists.org. Our list name is icu-pcb-forum > or go to //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > > Want to post a job listing ? DON'T DO IT HERE! > Better yet, join our jobs listing forum. > > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx > POST: icu-jobs-forum@xxxxxxxxxx > ----------------------------------------------------------- > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------