To all gurus: I have multiple gnds (pwr,signal,earth and shield) and i need to edit all layer, so i'll change all planes to dynamic shape and let program clear all via that don't need to be tied. But i always get drc errors, rule says 8 mils but the opening is 7.99 mils. What gives? after i'm finish i change shape type back to static and tie all the four types of gnds back together around board edge. Why do i always get the 7.99 mils? thanks in advance Sam ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------