This file is automatically generated when you go to: Manufacture->NC->Drill Parameters. in Allegro Les Wong --- Tony Stanislao <stanislao_t@xxxxxxxxxxxx> wrote: > Mike, > > > > What does this NC_TOOLS.TXT format look like. Do > you have a sample > file? > > > > Thanks in advance. > > > > Tony Stanislao, Senior PCB Design Engineer > Pannaway Technologies | v: 603.766.5129| e: > stanislao_t@xxxxxxxxxxxx > <mailto:%20stanislao_t@xxxxxxxxxxxx> > > ========================================= > > > > -----Original Message----- > From: gnieski, mike [mailto:gnieski_mike@xxxxxxx] > Sent: Tuesday, June 15, 2004 1:32 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Trying to find a specific > drill size > > > > Try running nctape with tools selected > and utilizing > nc_tools.txt should break your drill file into > separate sections, then > check the size with the 66. > > Sounds like a double hit on a via might > want to check your > via-via DRC's to see if you have two vias at the > same spot. > > > > Mike > > > > -----Original Message----- > From: Brian Alcock [mailto:balcock@xxxxxxxxxxx] > Sent: Tuesday, June 15, 2004 1:16 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Trying to find a specific drill > size > > > > > > My drill legend reports a quantity of 66 for a > specific drill size and > I only need to have 64. How can I get the X,Y > coordinates for that drill > size > > Brian > > > > > BEGIN:VCARD > VERSION:2.1 > N:Stanislao;Tony > FN:Tony Stanislao > ORG:Pannaway Technologies > TITLE:Senior PCB Design Engineer > NOTE;ENCODING=QUOTED-PRINTABLE:Pannaway Technologies > designs and develops converged broadband voice, > video = > and data platforms. Its solutions enable > telecommunications providers world= > wide to offer unified services to homes and > businesses with an unbeatable va= > lue proposition-opening new markets and creating new > revenue streams.=0D=0A= > =0D=0APannaway's pioneering Service Convergence > Network (SCN=99) architectur= > e offers telecommunications service providers the > first carrier-class, end-t= > o-end IP converged solution available anywhere, in > turn allowing them to del= > iver a secure combination of guaranteed billable > services over a single conn= > ection.=0D=0A=0D=0ARigorously architected and > thoroughly tested by Pannaway'= > s Ethernet IP and voice experts, the Service > Convergence Network is the #1 s= > ingle-vendor solution for secure, converged > broadband transport services.= > =0D=0A > TEL;WORK;VOICE:603-766-5129 > TEL;WORK;FAX:603-766-5150 > ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;215 Commerce > Way =0D=0ASuite 3;Portsmouth;NH;03801;United States > LABEL;WORK;ENCODING=QUOTED-PRINTABLE:215 Commerce > Way =0D=0ASuite 3=0D=0APortsmouth, NH > 03801=0D=0AUnited States > URL;WORK:http://www.pannaway.com > EMAIL;PREF;INTERNET:stanislao_t@xxxxxxxxxxxx > REV:20031211T230145Z > END:VCARD > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------