[PCB_FORUM] Re: Trying to find a specific drill size
- From: "Tony Stanislao" <stanislao_t@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 15 Jun 2004 14:48:49 -0400
Mike,
What does this NC_TOOLS.TXT format look like. Do you have a sample
file?
Thanks in advance.
Tony Stanislao, Senior PCB Design Engineer
Pannaway Technologies | v: 603.766.5129| e: stanislao_t@xxxxxxxxxxxx
<mailto:%20stanislao_t@xxxxxxxxxxxx>
=========================================
-----Original Message-----
From: gnieski, mike [mailto:gnieski_mike@xxxxxxx]
Sent: Tuesday, June 15, 2004 1:32 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Trying to find a specific drill size
Try running nctape with tools selected and utilizing
nc_tools.txt should break your drill file into separate sections, then
check the size with the 66.
Sounds like a double hit on a via might want to check your
via-via DRC's to see if you have two vias at the same spot.
Mike
-----Original Message-----
From: Brian Alcock [mailto:balcock@xxxxxxxxxxx]
Sent: Tuesday, June 15, 2004 1:16 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Trying to find a specific drill size
My drill legend reports a quantity of 66 for a specific drill size and
I only need to have 64. How can I get the X,Y coordinates for that drill
size
Brian
BEGIN:VCARD
VERSION:2.1
N:Stanislao;Tony
FN:Tony Stanislao
ORG:Pannaway Technologies
TITLE:Senior PCB Design Engineer
NOTE;ENCODING=QUOTED-PRINTABLE:Pannaway Technologies designs and develops
converged broadband voice, video =
and data platforms. Its solutions enable telecommunications providers world=
wide to offer unified services to homes and businesses with an unbeatable va=
lue proposition-opening new markets and creating new revenue streams.=0D=0A=
=0D=0APannaway's pioneering Service Convergence Network (SCN=99) architectur=
e offers telecommunications service providers the first carrier-class, end-t=
o-end IP converged solution available anywhere, in turn allowing them to del=
iver a secure combination of guaranteed billable services over a single conn=
ection.=0D=0A=0D=0ARigorously architected and thoroughly tested by Pannaway'=
s Ethernet IP and voice experts, the Service Convergence Network is the #1 s=
ingle-vendor solution for secure, converged broadband transport services.=
=0D=0A
TEL;WORK;VOICE:603-766-5129
TEL;WORK;FAX:603-766-5150
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;215 Commerce Way =0D=0ASuite
3;Portsmouth;NH;03801;United States
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:215 Commerce Way =0D=0ASuite
3=0D=0APortsmouth, NH 03801=0D=0AUnited States
URL;WORK:http://www.pannaway.com
EMAIL;PREF;INTERNET:stanislao_t@xxxxxxxxxxxx
REV:20031211T230145Z
END:VCARD
Other related posts:
