[PCB_FORUM] Re: Trying to find a specific drill size
- From: "gnieski, mike" <gnieski_mike@xxxxxxx>
- To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 15 Jun 2004 13:31:59 -0400
Try running nctape with tools selected and utilizing
nc_tools.txt should break your drill file into separate sections, then check
the size with the 66.
Sounds like a double hit on a via might want to check your
via-via DRC's to see if you have two vias at the same spot.
Mike
-----Original Message-----
From: Brian Alcock [mailto:balcock@xxxxxxxxxxx]
Sent: Tuesday, June 15, 2004 1:16 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Trying to find a specific drill size
My drill legend reports a quantity of 66 for a specific drill size and I
only need to have 64. How can I get the X,Y coordinates for that drill size
Brian
Other related posts:
