[PCB_FORUM] Re: ICU2004 - PCB Top 5 Issue's
- From: "Ritter, Alan" <Alan.Ritter@xxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Thu, 24 Jun 2004 08:51:03 -0400
1. Make the "pan" functions work the SAME in both Concept and Allegro.
(This was wrong in 12.x and before, fine in 13.x, broken (again) in 14.x).
Ditto for the sense of mouse buttons when panning..."shift/hold" in Allegro,
just "hold" in Concept. Grrr...
2. In the artwork generation menu, there is a "select all" button, but no
"deselect all" button. Add a "deselect all" button!
3. How about using the mouse wheel (most of us have wheel mice) for zoom
in/out?
4. Fix the plot bug in Allegro that causes Allegro to crash unpredictably
when changing printers or print/plot settings. (Have to delete
pcbenv\allegro.ini to fix it, which loses all sorts of settings) (Seems
much worse under 14.2 and XP than it was under Win/2k)
5. Bring back the ability to manually build complex parts and define
different asymmetric functions in different "versions" of the part. Used to
be able to do that by manually combining chips.dat files when you compiled
chip schematic/pinout drawings but under the new (and "improved") librarian,
you can't, at least not easily.
/s/jar (alan.ritter@xxxxxxxxxx)
http://www.mtritter.org
Bausch & Lomb
150 Years of Perfecting Vision, Enhancing Life (TM)
EMAIL DISCLAIMER
Please Note: The information contained in this message may be privileged and
confidential, protected from disclosure, and/or intended only for the use of
the individual or entity named above. If the reader of this message is not
the intended recipient, or an employee or agent responsible for delivering
this message to the intended recipient, you are hereby notified that any
disclosure, distribution, copying or other dissemination of this
communication is strictly prohibited. If you received this communication in
error, please immediately reply to the sender, delete the message and
destroy all copies of it.
Thank You
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
