[haiku-development] Re: Network Configuration

  • From: HaikuBot <service.exchange@xxxxxxxxx>
  • To: haiku-development@xxxxxxxxxxxxx
  • Date: Wed, 28 Apr 2010 19:55:01 +0600

2010/4/28 Gerald Zajac <zajacg@xxxxxxxxxxxxx>

> How about adding the ability in the Network preflet to disable a network
> interface.  I recently installed Haiku on a computer which had a network
> interface build into the mother board (VIA Rhine with device ID 0x3065) and
> a 3Com PCI network card (device ID 0x9055).  Although the ethernet cable was
> connected to only one of the interfaces, WebPositive was unable to access
> any web sites, and trying to configure the connected network interface using
> DHCP with the Network preflet did not solve the problem.  However, after I
> removed the 3Com PCI network card and configured the VIA Rhine for DHCP,  I
> was able to access the internet without any problems.
> It appears that when both network interfaces were available, Haiku was
> confused about which connection to use.
> -- Gerald
+1 have almost same situation

With best regards HaikuBot

Other related posts: