[gps-talkusers] Re: cannot find street using the address lookup feature
- From: "Kevin Chao" <g.unit89@xxxxxxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Tue, 31 Jul 2007 16:14:32 -0700
James,
Do you have a name of a commercial POI that is near this adddress?
Thanks,
Kevin
----- Original Message -----
From: "James Malone" <malone_j@xxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Tuesday, July 31, 2007 4:08 PM
Subject: [gps-talkusers] Re: cannot find street using the address lookup
feature
>I forgot to add the address.
> You will find it below.
>
> -----Original Message-----
> From: gps-talkusers-bounce@xxxxxxxxxxxxx
> [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of James Malone
> Sent: Tuesday, July 31, 2007 3:54 PM
> To: gps-talkusers@xxxxxxxxxxxxx
> Subject: [gps-talkusers] Re: cannot find street using the address lookup
> feature
>
> Why sure!
> I type California as the state, Sacramento for the city, 11 entrys come
> up,
> then I choose the grater Sacramento area. Then I type the address8953
> then
> street name. I typed Brydon way for example.
> It says no street was found.
>
> -----Original Message-----
> From: gps-talkusers-bounce@xxxxxxxxxxxxx
> [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Chao
> Sent: Tuesday, July 31, 2007 3:47 PM
> To: gps-talkusers@xxxxxxxxxxxxx
> Subject: [gps-talkusers] Re: cannot find street using the address lookup
> feature
>
> James,
>
> Can you provide a specific example? For example,
>
> state: california
> city: stockton
> address number: blank
> street name: i
> choose i-5nb and returned with no streets
>
> Thanks,
>
> Kevin
> ----- Original Message -----
> From: "James Malone" <
> malone_j@xxxxxxxxxxx>
> To: <
> gps-talkusers@xxxxxxxxxxxxx>
> Sent: Tuesday, July 31, 2007 3:42 PM
> Subject: [gps-talkusers] Can't find a street name in the maps folder
>
>> Hi all,
>> Some names of streets still can't be found.
>> For example: I typed my default state, City address, then street. No
>> matches were found, and I was asked to type in the street name.
>> Is there another way of typing this in or is there a setting to tell
>> the program to look for a newer section of the city?
>> I'm trying to set a destination for a client's new home, but I can't
>> even get the cross street. Yet, I did a map quest along with a sighted
>> person and found his street with no problems. As I was going down the
>> street, the GPS was able to find the street with no problems.
>> Do I need to save this as a POI?
>> Thanks.
>> James
>>
>>
>>
>
>
>
>
>
>
>
>
Other related posts:
