I forgot to add the address. You will find it below. -----Original Message----- From: gps-talkusers-bounce@xxxxxxxxxxxxx [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of James Malone Sent: Tuesday, July 31, 2007 3:54 PM To: gps-talkusers@xxxxxxxxxxxxx Subject: [gps-talkusers] Re: cannot find street using the address lookup feature Why sure! I type California as the state, Sacramento for the city, 11 entrys come up, then I choose the grater Sacramento area. Then I type the address8953 then street name. I typed Brydon way for example. It says no street was found. -----Original Message----- From: gps-talkusers-bounce@xxxxxxxxxxxxx [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Chao Sent: Tuesday, July 31, 2007 3:47 PM To: gps-talkusers@xxxxxxxxxxxxx Subject: [gps-talkusers] Re: cannot find street using the address lookup feature James, Can you provide a specific example? For example, state: california city: stockton address number: blank street name: i choose i-5nb and returned with no streets Thanks, Kevin ----- Original Message ----- From: "James Malone" < malone_j@xxxxxxxxxxx> To: < gps-talkusers@xxxxxxxxxxxxx> Sent: Tuesday, July 31, 2007 3:42 PM Subject: [gps-talkusers] Can't find a street name in the maps folder > Hi all, > Some names of streets still can't be found. > For example: I typed my default state, City address, then street. No > matches were found, and I was asked to type in the street name. > Is there another way of typing this in or is there a setting to tell > the program to look for a newer section of the city? > I'm trying to set a destination for a client's new home, but I can't > even get the cross street. Yet, I did a map quest along with a sighted > person and found his street with no problems. As I was going down the > street, the GPS was able to find the street with no problems. > Do I need to save this as a POI? > Thanks. > James > > >