Thank you Dani, this is the first time I am using goodfeel with this
Embosser Basic DV2. I set the carrectors and lines, for 40 and 27 lines. but
I don't know why the measure numbers are on the pin holes. and a couple or
sometimes Three measures are on the paper, and there is so much space left
at the right side. I don't know how to set the embosser as generic text only
printer. I need this embosser for my english braille too. for that, I use
win braille, now, win braille has top, bottom, right and left margins and
page width and size and so on. and it is so easy to set how we want. I don't
understand why Goodfeel doesn't have it. no margins no page size nothing. I
guess you must be using the latest braille printer. Please tell me how to
set this embosser as generic text only printer? is it a driver?Thank you
again, Cheers,Ruby
----- Original Message -----
From: "Dani Pagador" <axs.brl@xxxxxxxxx>
To: <goodfeel@xxxxxxxxxxxxx>
Sent: Tuesday, June 09, 2015 3:17 AM
Subject: [goodfeel] Re: any help is appreciated
Hi, Ruby.
Here's my $.02.
Make sure you've installed your embosser as a Generic/Text-only printer.
In Goodfeel, go to File Menu, arrow down to Embosser Setup, and hit Enter.
There are edit fields for characters per line and lines per page.
Enter the values you'd like to set for these.
Next, tab to "Embosser device" and arrow through till you land on the
Windows Printer radio button.
Tab once and use the arrow keys to find your embosser name in the combo box.
Tab to "Save these values as defaults" if you would like to always use
these settings, and hit Enter.
If the settings are just for the current session, tab to the OK button
and hit Enter.
Do a test print to see where the braille falls.
If necessary, adjust your tractor feed levers to move the paper so the
braille falls where you want it.
Is this your first time embossing with Goodfeel? Or is this braille
too close to the pin holes a new thing?
HTH,
Dani
On 6/8/15, Ruby Alphonse <rubyalphonse@xxxxxxxxx> wrote:
Hi all,** To leave the list, click on the immediately-following link:-
I am using index Braille Embosser DV2 it is an old version, now, when I
take a print out, my bar numbers or measure numbers comes on to the pin
holes. how to set margin on left or right for goodfeel, will anyone help me?
any help would be appreciated. Thank you in advance, Ruby
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
