Hafed, As Alex stated, this is a manual procedure. Figure out the priority of a = specific block and add the number (1, 2 3, etc) into the message line. = You need to work with the Alarm Management software package to determine = how the package can extract the priority out of the message. You may = need a special character around the priority number so that the Alarm = Management program can automatically extract the priority. You really need to discuss this with the Alarm Management supplier. Once = he and you determine how to extract priority, then the manual part is = just using the Integrated Control Configurator. Terry=20 -----Message d'origine----- De : foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] = De la part de Ghodhbani, Hafedh Envoy=E9 : January 19, 2007 8:48 AM =C0 : foxboro@xxxxxxxxxxxxx Objet : Re: [foxboro] Priority in Alarm messages Terry, It will have an added value for me to introduce the=20 Alarm priority into the printed messages. Can you please advise how to do. Regards Hafedh mailto:hafedh.ghodhbani@xxxxxxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave