Re: [foxboro] Integrator 30 for Modbus quirk
- From: "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 9 Feb 2009 11:39:36 +1300
Hi Virgil
FBM 232/233 (ethernet) are designed not to work in multidrop situations
Even though they use IP address and device address in their
configuration they insist on only one device per IP address.
In my situation I wanted to talk RS485 to Durag flame controllers and
had to install an IP/Serial gateway per Durag
Shaun
NOTICE - This message and any attached files may contain information that is
confidential, legally privileged or proprietary. It is intended only for use
by the intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error. Any dissemination, copying, use
or re-transmission of this message or attachment, or the disclosure of any
information therein, is strictly forbidden. BlueScope Steel Limited does not
represent or guarantee that this message or attachment is free of errors, virus
or interference.
If you have received this message in error please notify the sender immediately
and delete the message. Any views expressed in this email are not necessarily
the views of BlueScope Steel Limited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
