Chad,
I would have thought Dale's suggestion would have worked.
We've had similar issues as you're describing.
Foxray (System Auditor) has picked up "Points in a Trend that aren't
Historized" before when all four trend points were, in fact , in the
historian. The issue arose when a point was inserted via copy & paste. The
solution was to edit the .g file (to find the hidden/embedded C:B.P) or to
rebuilt the trend from scratch.
Is there another hist01 somewhere on the system? I would have thought once
it was turned off it would no longer find it (even though it might still
look for it).
Mike Jaudon
PSI
On Tuesday, September 20, 2016, Chad Ziesemer <cziesemer@xxxxxxxxxxxxxxxxxxx>
wrote:
Hi list,
I have a number of trends in FoxView that recently decided to go look for
an old historian and therefore not populating with data, here's the
behavior:
1. If I right click on the dysfunctional trend, go to advanced, and
go to advanced pen 1 (2,3,4), under historian name it says hist01 (old
historian name).
2. When I open the same trend in foxdraw it is configured to hist80
(proper historian name).
3. Back in Foxview If I change this to hist80, select "permanent"
under save/exit choices, and refresh the trend it works at first.
4. I can open and close the trend and it keeps coming up hist80 and
good data.
5. Randomly(ish), I'll open the exact same trend and I'll get no
data. The advanced pen screen shows again hist01. Foxdraw still shows
it's configured as hist80. Some of the trends I fixed are still working,
others reverted back, I can't pick up a pattern to the madness.
Has anyone experienced anything similar or have an idea to try?
I/A 8.4.2
FoxView 10.1
ICC
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx
<javascript:;>?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx ;<javascript:;>
?subject=leave
