After initial success, the trends reverted back to hist01 (old historian)
today. New symptom, I watched my co-worker open up one of the offending trends
and it came up properly, 10 seconds later I opened up the same trend from a
different box and it reverted to hist01. Also a few of the past offending
trends appear to be staying fixed (for now), even though they were all repaired
with the same method.
Any other ideas are appreciated!
Thanks,
Chad
-----Original Message-----
From: Chad Ziesemer
Sent: Tuesday, September 20, 2016 11:37 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: RE: [foxboro] Foxview trend reverting to wrong historian
Thanks Dale! I saved a few of the offending trends to .g files. I could not
find any hist01 references in the .g file but saved it back to .fdf anyways.
Without making any other changes the data appears the first time I reload the
trend and the pens are showing hist80. Time will tell if it's permanent but
this appears promising!
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of GILLIS, DALE
Sent: Tuesday, September 20, 2016 10:45 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] Foxview trend reverting to wrong historian
Hi Chad.....
I believe I had similar problems. Foxboro converted our Trends from Display
manager to Foxview/FoxDraw back in 2008 and often old descriptors, historians,
and engineering units would stay from the old graphics but were unwanted as
most of these changed. You could make a permanent change but still they'd
revert back after a couple of recalls. Very annoying but after I changed the
Foxview to a .g file and edit with a text editor and delete any "hist01" text
in our case and then convert .g file back to FoxView the permanent change would
correctly stay as "hist05" after that. Not saying you have the same problem
but it's something you could try.
DG
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Chad Ziesemer
Sent: Tuesday, September 20, 2016 10:14 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Foxview trend reverting to wrong historian
Hi list,
I have a number of trends in FoxView that recently decided to go look for an
old historian and therefore not populating with data, here's the behavior:
1. If I right click on the dysfunctional trend, go to advanced, and go to
advanced pen 1 (2,3,4), under historian name it says hist01 (old historian
name).
2. When I open the same trend in foxdraw it is configured to hist80
(proper historian name).
3. Back in Foxview If I change this to hist80, select "permanent" under
save/exit choices, and refresh the trend it works at first.
4. I can open and close the trend and it keeps coming up hist80 and good
data.
5. Randomly(ish), I'll open the exact same trend and I'll get no data.
The advanced pen screen shows again hist01. Foxdraw still shows it's
configured as hist80. Some of the trends I fixed are still working, others
reverted back, I can't pick up a pattern to the madness.
Has anyone experienced anything similar or have an idea to try?
I/A 8.4.2
FoxView 10.1
ICC
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Canada Anti-Spam Law Notice – To stop receiving commercial electronic messages
from us, please forward this email to unsubscribe@xxxxxxxxxx with the word
“unsubscribe” in the subject line. | Nova Scotia Power | 1223 Lower Water
Street, Halifax NS B3J 3S8 | www.nspower.ca
Confidentiality Notice - The email communication is considered confidential and
is intended only for the recipient(s). If you received this email in error,
please contact the sender and delete the email. Unauthorized disclosure or
copying of this email is prohibited.
Attachment Limits - Emera will not accept email larger than 20MB or emails
containing high risk attachments like ZIP, EXE or others that could contain
viruses.
If you have a business need to send such an email, please contact the recipient
for instructions.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
