Hi list,
I have a number of trends in FoxView that recently decided to go look for an
old historian and therefore not populating with data, here's the behavior:
1. If I right click on the dysfunctional trend, go to advanced, and go to
advanced pen 1 (2,3,4), under historian name it says hist01 (old historian
name).
2. When I open the same trend in foxdraw it is configured to hist80
(proper historian name).
3. Back in Foxview If I change this to hist80, select "permanent" under
save/exit choices, and refresh the trend it works at first.
4. I can open and close the trend and it keeps coming up hist80 and good
data.
5. Randomly(ish), I'll open the exact same trend and I'll get no data.
The advanced pen screen shows again hist01. Foxdraw still shows it's
configured as hist80. Some of the trends I fixed are still working, others
reverted back, I can't pick up a pattern to the madness.
Has anyone experienced anything similar or have an idea to try?
I/A 8.4.2
FoxView 10.1
ICC
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave