Hello Caryn
I have been entering codes for around 20 years, using the control left
bracket or f9, and could easily read the code I had just entered. That is
not the case now. I played around with changing fonts and views today, but
nothing solved my problem. With codes revealed, when I arrow around in a
print or braille document, jaws doesn't read the words or all the codes. I
have another computer that has never had DBT installed and I would like to
install 12.3 just to see if there is any difference. I've always had help
with installing DBT, and one area is confusing to me. Computer name. What is
that? Where should I look for it? Thanks for your help.
Ann Foxworth
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> On Behalf
Of Caryn Navy
Sent: Monday, October 1, 2018 9:53 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: problems with DBT 12.3 and jaws
Hello Ann.
Roger Newall is quite correct in his description about inserting codes.
In the View menu, press Enter on the new font choice that you want, be it
Braille Font or SimBraille Font. Or without going to the View menu, you can
just press Control+F6 for Braille or Control+F7 for SimBraille.
Now to the issue about JAWS repeating lines when you arrow around. I know
that can happen when you arrow up or down in a braille document and you are
very far into the document. I just duplicated this by arrowing up and down
400 pages into a braille document.
Sincerely,
Caryn
Caryn Navy
Duxbury Systems, Inc.
On 10/1/2018 2:45 PM, Ann Foxworth wrote:
I'm running windows 10 on a laptop with jaws 18 and DBT 12.3. I had the same
problem with 12.2 and 12.1 as well. When I type control plus left bracket,
the brackets are not on the screen for me to enter my code between them. At
least, if they show on the screen, jaws is not announcing them. Where they
should be, I'm finding blank spaces. If I type in a code anyway, DBT says my
codes were not entered properly. Also, as I arrow down or right or left,
every line is repeated by jaws at least twice and sometime the cursor will
not move at all. I checked the view settings and both full page and print
font are checked. I tried to uncheck print font but there is apparently no
way to perform that action. Does anyone have any ideas what might be going
on?
Ann Foxworth
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
