[ddots-l] Re: problem with cleaning up tracks
- From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 21 Feb 2007 16:07:58 -0800
The other thing you can do is to delete, even from the recycle bin, the .cwp
version of a project after you've saved a .cwb version. That will
definitely remove all he unwanted material. If the .cwp version still
exists, there's a possibility that Sonar will think that the out takes are
still connected to the .cwp file, and may not show the outtakes as unwanted
material suitable for deletion, I think.
Deleting the .cwp version after creating the .cwb version is definitely the
way to go. Remember to permanently delete it from the recycle bin.
K.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Luis Elorza
Sent: Wednesday, February 21, 2007 3:46 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: problem with cleaning up tracks
when you save the project in the bundle format it incorporates only the
audio used in the project. this at the same time helps to discard all the
out takes the various edits andno longer used material.
what i do is to backup the projects in bundle format and delete the whole
audio folder. but to do this you have to be sure there is not audio from
other projects in that folder.
another thing that has proven to be convenient is to have a folder
exclusively for each project, you can do that by choosing new from the file
menu and filling the dialog be sure to check the store project audio in its
own foldercheckbox.
----- Original Message -----
From: "Blind Luck Music" <ross@xxxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, February 21, 2007 2:06 PM
Subject: [ddots-l] Re: problem with cleaning up tracks
> Luis or anyone else,
>
> I'm having difficulty getting support on the phone from cakewalk
> because
> they do not support version 4. Luis had mentioned you save your files in
> bundle folders. If I make a bundle file from my most recent saving of the
> project, does that mean that all the other outtakes, which are numerous,
> will not be attached to that.Hence, if I then move them to an external
> disk drive and delete them from the sonar opened dialogue will all the
> tracks and recorded tracks I have recorded be gone from my E drive? I
> hope I stated that clearly enough. Thanks.
>
> Ross
>
> ----- Original Message -----
> From: "Luis Elorza" <luiselorza@xxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, February 19, 2007 4:16 PM
> Subject: [ddots-l] Re: problem with cleaning up tracks
>
>
>>i really hate that clean up dialog, what i do is to save the files in
>>bundle format that way i keep only the waves that are used in the
>>project..
>> ----- Original Message -----
>> From: "Blind Luck Music" <ross@xxxxxxxxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Monday, February 19, 2007 12:54 PM
>> Subject: [ddots-l] Re: problem with cleaning up tracks
>>
>>
>>>I tried all the procedures you all suggested and unfortunately, I
>>>just
>>>get into a loop where when I close the unreadable tracks dialogue, it
>>>just goes back to the previous menu and when I select "find", it goes
>>>back to the unreadable tracks dialogue. Any other thoughts?
>>>
>>> Ross
>>>
>>> Ross Wine-Sky
>>>
>>> 1708 21st Ave. South #453
>>>
>>> Nashville, TN 37212
>>>
>>> 615-298-5258
>>>
>>> 615-828-9784 cell
>>>
>>> ross@xxxxxxxxxxxxxxxxxx
>>>
>>> www.wine-sky.com
>>>
>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>>> Subject:- faq
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> Subject:- faq
>>
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
