[ddots-l] Re: Bussing question
- From: "Greg Brayton" <Greg@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 14 Sep 2011 13:42:07 -0400
Thanks Gord I'm not sure how to use the grouping function, does it take to long
to explain via email, is it somewhere in the cake talking tutorials?
----- Original Message -----
From: Gordon Kent
To: ddots-l@xxxxxxxxxxxxx
Sent: Wednesday, September 14, 2011 10:41 AM
Subject: [ddots-l] Re: Bussing question
Greg:
THat is the best way to do it, but it is also where grouping comes in. If
you assign all the sends to a group, you’ll only need to adjust one, assuming
you want them all to have the same amount of reverb. Your other alternative
would be to go into the inspector of the bus, make sure fx is displayed and
that the parameters are showing, and set the wet/dry balance from there.
Gord
From: Greg Brayton
Sent: Wednesday, September 14, 2011 10:31 AM
To: ddots-l@xxxxxxxxxxxxx ; midi mag
Subject: [ddots-l] Bussing question
I have a project with 12 vocal tracks. I inserted a stereo bus and set the
outputs of each track to that vocal buss. Now if I use the effects strip on the
bus to add reverb, it's way to heavy. I thought maybe I could get in there and
turn down stuff using the hot spots but I can't seem to figure out how to do
that.
I also tryed inserting a new bus and out putting to that and I can't seem to
get any more control doing that.
Am I gonna have to insert the reverb send on each track like I've done before
and control it with each individual send volume? Is that the only way.
I can do that of course but I just thought there might be an easier way. Any
help would be much appreciated.
Other related posts:
