[softwarelist] Printing Problem with OP 2.76 for RISC OS
- From: Steve Joyce <Steve@xxxxxxxxxxxxxxxxxx>
- To: David Pilling Software <davidpilling@xxxxxxxxxxxxx>
- Date: Tue, 01 Aug 2006 12:21:24 +0100
I have created an OP document where the printed version differs from the
screen display on just one line. When printed, the offending line stops
in the middle of a word and the remainder of that line is printed some
distance (105mm) further down the page - the screen display appears
normal. No other discrepancies are apparent between the display and
printed versions. The problem did not appear in earlier, nut incomplete,
versions of the document.
Details are as follows:
OP version 2.76
Printers 1.90b4, Epson Stylus Colour 740
RISC OS Adjust 4.39
RPC SA 96+2 Mb
Document:
11 pages, 1 chapter, 2.67Mb - mostly graphics
Master page is A5 DPS, printed sideways at 95% scale
I cannot imagine what could be present in the file to cause this effect.
Cheers,
Steve Joyce
Other related posts:
