[brailleblaster] Re: Embossing from the command line
- From: Keith Creasy <kcreasy@xxxxxxx>
- To: "brailleblaster@xxxxxxxxxxxxx" <brailleblaster@xxxxxxxxxxxxx>
- Date: Mon, 15 Jul 2013 11:40:00 +0000
Vic.
I don't know either. We have not made changes to the command-line interface. It
is probably doing whatever the previous design used. I've been meaning to make
this a priority, that is making sure the the same parameters are used for
output as are used for editing. It isn't very helpful to let people review and
edit the braille if it ends up printing differently.
Someone needs to spend some time on this. I was under the impression that
others were working on this besides us (APH) and John but right now we seem to
be doing it. I'm not sure we can do it all.
Keith Creasy
Software Developer
American Printing House for the Blind
KCreasy@xxxxxxx
Phone: 502.895.2405
Skype: keith537
-----Original Message-----
From: brailleblaster-bounce@xxxxxxxxxxxxx
[mailto:brailleblaster-bounce@xxxxxxxxxxxxx] On Behalf Of Vic Beckley
Sent: Saturday, July 13, 2013 11:00 AM
To: brailleblaster@xxxxxxxxxxxxx
Subject: [brailleblaster] Embossing from the command line
Keith,
Embossing with the emboss subcommand does work with the latest build of BB.
I am sending it to a text-only embosser set up as a Generic / Text Only
printer. However, the Braille output didn't look like the Braille output when
using either the NIMAS.cfg or preferences.cfg files. I don't know what settings
it was using.
Best regards from Ohio,
Vic
Other related posts:
