[bookport] Re: Plantronics Pulsar 590A headphones

  • From: "Scott Huddleson" <hudd61@xxxxxxxxxx>
  • To: <bookport@xxxxxxxxxxxxx>
  • Date: Sun, 25 Feb 2007 13:48:08 -0500

thanks, that's what I thought. I guess my adapter came with it switched on already, otherwise I would have had to read the instructions. I wondered why it took so long to charge, while the headphone charge was much shorter.


----- Original Message ----- From: "Richard Benoit" <reb503@xxxxxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Sunday, February 25, 2007 1:36 PM
Subject: [bookport] Re: Plantronics Pulsar 590A headphones


Hi Scott,

Pressing and brierly holding the center button on the adapter places it in pairing mode for a brief period to pair with a headset or other recieving devece. The headset that came with it has already been paired at the factory.

Richard
----- Original Message ----- From: "Scott Huddleson" <hudd61@xxxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Sunday, February 25, 2007 9:03 AM
Subject: [bookport] Re: Plantronics Pulsar 590A headphones


I've had this headset for about a month and I never knew there was a switch there. If this turns the adapter on/off, what does the button in the center do? I feel like an idiot now, I thought I had it more together than this. Oh well, you know those long time diabetics; nothing works like it used too. thanks.

----- Original Message ----- From: "Richard Benoit" <reb503@xxxxxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Sunday, February 25, 2007 6:46 AM
Subject: [bookport] Re: Plantronics Pulsar 590A headphones


Hi William,

You didn't mention turning on the adapter, so if you didn't, this is how you do it. There is a ring shaped switch that surrounds the center button that has what feel like serrations It turns quite hard so take both thumbnails and turn counterclockwise until you feel a definite click. There will be a blue flashing light (you may need sighted help). The switch turns easier with use. Also, make sure that the volume on the Bookport is up and the volume on the headset is up (the front ridge shaped button on the headset). Hopefully it will be that you just didn't have the adapter switch on.
Richard
Original Message ----- From: "William Stephan" <wstephan@xxxxxxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Saturday, February 24, 2007 5:49 PM
Subject: [bookport] Re: Plantronics Pulsar 590A headphones


Can one of you good folks who uses these phones contact me offlist
please?

I just bought a pair for my wife's use, and I have no clue what I'm
doing.

I think both parts are charged, and when I slide what I think is the
on/off switch on the headset, I get a low tone after about ten seconds
or so. I've scanned the manual, and learned a little, but obviously not
enough.

So, help will be much appreciated.











Other related posts: