Hi:
Turn the unit so that the flash card is closest to you and the headphone
jack is to your right (90 degrees from normal operation). Then, press
Pound, C and F (which are now on the bottom row) at the same time.
Before using it for the first time, you'll want to familiarize yourself
with the Braille Keyboard Layout, which can be found in Appendix C of the
manual. From the manual:
New Note: #+C+F
To start a new note, use the New Note command. When you press the New Note
command, the device opens a new file in the \Notes folder. If there is no
\notes
folder, Book Port creates it. Once Book Port creates the new file, it
switches to the braille keyboard layout. All commands you use after using
this command
come from the braille keyboard layout until you press Escape to exit the
note.
Edit Note: 3+6+9
To edit an existing note, use the file movement commands to point to the
note, then press the Edit Note command. Once the unit opens the existing
note,
it switches to the braille keyboard layout. All commands you use after
this command come from the braile keyboard layout until you press Escape
to exit
the note.
The software remembers the last position in the note file when you edit.
Inserting Text
To insert additional text into a note, use the navigation keys to move to
the place in the note where you wish to add the new information, and begin
typing.
Exit Note: Escape
When you finish with a note, press Escape to exit the note taker. The
software leaves you pointing to the current file in the notes folder. Once
you exit
the note taker, the unit switches back to the normal keyboard layout, and
you may use the normal file navigation commands to move from file to file
or
to back out of the Notes folder.
See Appendix C for more on the Braille Keyboard layout.
Pamela Rader, TECHNICAL SUPPORT
American Printing House For The Blind
1839 Frankfort Ave.
Louisville, KY 40206
PHONE: 1-800-223-1839, Ext. 307
tataindi@xxxxxxxxxxxxx 11/12/07 10:23AM >>>
Hello,
Would anyone please explain to me how do I enter Note Taking mode?
I'm trying to find this info in the manual right now, but I don't
understand.
Thank you,
Tat
