[bookport] Re: Need help

  • From: "Elaine" <elaine18@xxxxxxx>
  • To: <bookport@xxxxxxxxxxxxx>
  • Date: Mon, 6 Feb 2006 07:22:30 -0600

Thanks for the info.  I pulled up the drive and the files I thought were gone 
are all there.  Still can not pull them up on the bookport.  Should I go ahead 
and get rid of everything?  But the card still disables the BP so reformatting 
from it is not an option.  Thanks Elaine
  ----- Original Message ----- 
  From: Mark Lee 
  To: bookport@xxxxxxxxxxxxx 
  Sent: Monday, February 06, 2006 12:30 AM
  Subject: [bookport] Re: Need help


  Try reformatting your two gig card.  If you can't do it by pressing the 1, 3, 
A, and C keys on your book port, reformat it from your computer.  If you plug 
your book port in and exit out of the book port transfer software, you can go 
into my computer, it will show up as a drive.  There is also a feature in the 
transfer software you can use to check the card for errors.  HTH

  Mark
    ----- Original Message ----- 
    From: Elaine 
    To: bookport@xxxxxxxxxxxxx 
    Sent: Sunday, February 05, 2006 11:31 PM
    Subject: [bookport] Need help


    Hi list,  I need a bit of help with a problem that has never happened to 
me.  The other day I changed batteries on my bookport and after that my 
bookport said that my 2 gig card had not files.  Well before I changed the 
batteries it was quite full with all sorts of audio books.  I took the 
batteries out and insert them again and no luck.  I then plugged it into the 
computer and bookport transfer recognized the unit and I had three folders left 
but no files in them.  I then took the bookport off the computer and it was 
dead I took the batteries out and put them back in and tried another card 
worked fine.  But if I put my 2 gig card back into the book it will cause it to 
go dead.  I pop the batteries and it will give me the "defaults restored" then 
I get no response from any of the buttons.  So gang what in the world have I 
done to my trusty BP.  It will work with my other cards.  The computer will 
recognize the card, but will not left me load anything on it and it causes the 
dead buttons.  HELP.  Hope this is clear and someone can help.
      Elaine

Other related posts: