[bookport] Re: MP3 question
- From: "Dave Cunningham" <dcj638586@xxxxxxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Wed, 7 Apr 2004 23:25:28 -0400
Hi Dave,
I just transferred a MP3 file that was 38MB and it transferred fine. No
problems and I received the success tone when it was finished. The file
plays well but I can't get it to go back or forward using any keys. It =
just
plays or stops when I hit the 2 key. No other keys work. =20
Dave
=20
Dave Cunningham
(412) 257-8153 Voice
(412) 215-4597 Cell
dcj638586@xxxxxxxxxxx
Email used for MSN as well.
=20
Norton Anti-Virus scan's all incoming and outgoing email.
-----Original Message-----
From: bookport-bounce@xxxxxxxxxxxxx =
[mailto:bookport-bounce@xxxxxxxxxxxxx]
On Behalf Of David Allen
Sent: Wednesday, April 07, 2004 10:53 PM
To: bookport@xxxxxxxxxxxxx
Subject: [bookport] Re: MP3 question
Hi Aman and others,
Perhaps you or someone here could correct my thinking as it may be =
wrong. I
have always transferred files to the bookport in the manner described, =
ie
selecting the file, pressing the context key, selecting send to, then
bookport from the send to menu. As you have described, I usually hear =
beeps
that seem to rise in pitch for a few seconds, followed by the success
signal. However, this doesn't always seem to work very well when
transferring large files. In this, I mean files of a size greater than
perhaps 10 Megs or so. In these cases, I hear the beeps, but they stop =
after
a few minutes. It is as if the transfer has haulted somewhere in =
midstream,
but I can't determine what, if anything is happening. Once I waited for =
well
over a half hour after the beeps had ceased before disconnecting. Is =
there a
way to make this smoother?
Thanks for any help.
Dave
Other related posts:
