Thanks for the info never know what you'll need :)
-------- Original Message --------
Subject: [AR] Re: Arocket Pump Progress
From: "John Stoffel" <john@xxxxxxxxxxx>
Date: Fri, July 17, 2015 11:48 am
To: arocket@xxxxxxxxxxxxx
"Monroe" == Monroe L King <monroe@xxxxxxxxxxxxxxxxxx> writes:
Monroe> I thought this was [off list] lol. But it doesn't really matter.
Monroe> As I was looking back threw the emails and can't seem to find the
Monroe> fella that was going to do some Barske design in CAD. If you see this
Monroe> please respond.
Monroe> Andrew brought up a good point I've been trying to figure out
Monroe> the best way to mount the impeller on these tiny shafts that
Monroe> are on these BLDC motors.
Hopefully not keyed shafts! Have you looked at using Polygon shafts
as well to help transfer the loads? The only reason I say this is
that my Dad runs a machine shop that specializes in machining
Polygons. I don't know if he can go *that* small though.
Stoffel Polygon in New York if you're interested.
John
